January

• Identification and quantification of alkylketene dimers by pyrolysis–gas chromatography/mass spectrometry and pyrolysis–gas chromatography/flame ionization detection, Journal of Pulp and Paper Science, January 2003, Vol. 29(1) (886KB)
  Odermatt, J., Meyer, R., Meier, D., Ettl, R.
• A rapid quantitative method to assess eucalyptus wood properties for kraft pulp production by ft–raman spectroscopy, Journal of Pulp and Paper Science, January 2003, Vol. 29(1) (292KB)
  Ona, T., Sonoda, t., Ohshima, J., Yokota, S., Yoshizawa, N.
• Formation of patterns on paper coated with a metering size press, Journal of Pulp and Paper Science, January 2003, Vol. 29(1) (928KB)
  Wikström, M., Grön, J.
• Characterization of wood and non-wood mechanical pulps by differential thermal analysis, Journal of Pulp and Paper Science, January 2003, Vol. 29(1) (679KB)
  Vichnevsky, S., Fuhr, B., Melnichuk, J.
• Effect of atmospheric pollution on paper stability, Journal of Pulp and Paper Science, January 2003, Vol. 29(1) (312KB)
  Adelstein, P.Z., Zinn, E.D., Reilly, J.M.
• Deresination of birch kraft pulp in bleaching, Journal of Pulp and Paper Science, January 2003, Vol. 29(1) (539KB)
  Bergelin, E., Holmbom, B.

February

• Flotation deinking of sorted office papers Using sodium octanoate and Sodium dodecanoate as surfactants And calcium as the activator, Journal of Pulp and Paper Science, February 2003, Vol. 29(2) (501KB)
  Acosta, D.A., Scamehorn, J.F., Christian, S.D.
• A facile route of formation of lignin-carbohydrate complexes during alkaline pulping, Journal of Pulp and Paper Science, February 2003, Vol. 29(2) (730KB)
  Létumier, F., Ämmälahti, E., Sipilä, J., Vuorinen, T.
• Selectivity improvement during oxygen delignification by adsorption of a sugar-based polymer, Journal of Pulp and Paper Science, February 2003, Vol. 29(2) (974KB)
  Van Heiningen, A., Violette, S.
• A new insight into the bleachability of kraft pulps, Journal of Pulp and Paper Science, February 2003, Vol. 29(2) (619KB)
  Jiang, Z.-H., Van Lierop, B., Nolin, A., Berry, R.
• Minor sources of carbonate in kraft pulping and oxygen delignification processes, Journal of Pulp and Paper Science, February 2003, Vol. 29(2) (628KB)
  Chai, X.-S., Zhu, J.Y., Luo, Q.
• Eucalyptus kraft pulp bleaching with chlorine dioxide at high temperature, Journal of Pulp and Paper Science, February 2003, Vol. 29(2) (250KB)
  Eiras, K.M.M., Colodette, J.L.

March

• Surface chemical composition and morphology of itc kraft fibres as determined by xps and fe–sem, Journal of Pulp and Paper Science, March 2003, Vol. 29(3) (379KB)
  Duchesne, I., Daniel, G., Van Leerdam, G.C., Basta, J.
• Suspension crowding for a general fibre-length distribution: application to flocculation of mixtures of short and long papermaking fibres, Journal of Pulp and Paper Science, March 2003, Vol. 29(3) (537KB)
  Huber, P., Roux, J.C., Mauret, E., Belgacem, N., Pierre, C.
• Stereo images as a tool to study paper surface topography, Journal of Pulp and Paper Science, March 2003, Vol. 29(3) (356KB)
  Reme, P.A., Kure, K.A.
• Influence of machine variables on fibre mat buildup at jet impingement, Journal of Pulp and Paper Science, March 2003, Vol. 29(3) (461KB)
  Dalpke, B., Green, S.I., Kerekes, R.J.
• Infrared transmittance of wet paper, Journal of Pulp and Paper Science, March 2003, Vol. 29(3) (136KB)
  Lee, H., Nishimoto, M., Speyer, R.F., Garner, A., Patterson, T.
• Heat transfer to flowing fibre suspensions, Journal of Pulp and Paper Science, March 2003, Vol. 29(3) (400KB)
  Duffy, G.G., Kazi, S.N., Chen, X.D.

April

• Kraft green liquor pretreatment of softwood chips. part ii: chemical effect on pulp carbohydrates, Journal of Pulp and Paper Science, April 2003, Vol. 29(4) (465KB)
  Ban, W., Singh, J., Wang, S., Lucia, L.A.
• Black liquor gasification with direct Causticization using titanates in a Pressurized entrained-flow reactor. part i: kinetics of the causticization reaction , Journal of Pulp and Paper Science, April 2003, Vol. 29(4) (433KB)
  Nohlgren, I., Sricharoenchaikul, V., Sinquefield, S., Frederick, W.J., Theliander, H.
• Three-dimensional reconstruction of a coating layer structure, Journal of Pulp and Paper Science, April 2003, Vol. 29(4) (887KB)
  Chinga, G., Helle, T.
• Spreading of aqueous liquids in unsized papers is by film flow, Journal of Pulp and Paper Science, April 2003, Vol. 29(4) (695KB)
  Roberts, R.J., Senden, T.J, Knackstedt, M.A., Lyne, M.B.
• The role of liquid content in carryover deposition in kraft recovery boilers – a fundamental study, Journal of Pulp and Paper Science, April 2003, Vol. 29(4) (390KB)
  Shenassa, R., Kuhn, C.C.S., Tran, H.N.
• Modelling the process of water penetration into softwood chips, Journal of Pulp and Paper Science, April 2003, Vol. 29(4) (385KB)
  Malkov, S., Kuzmin, V., Baltakhinov, V., Tikka, P.

May

• Cationic montmorillonite: preparation and synergy with anionic polymer in filler flocculation, Journal of Pulp and Paper Science, May 2003, Vol. 29(5) (356KB)
  Liu, W., Ni, Y., Xiao, H.
• Alkaline peroxide bleaching of aspen chips. part i: kinetics, mechanism and thermodynamics, Journal of Pulp and Paper Science, May 2003, Vol. 29(5) (275KB)
  Xu, E.C., Hoddenbagh, M.
• Thermogravimetric determination of synthetic polymers in recycled pulp systems and deposits, Journal of Pulp and Paper Science, May 2003, Vol. 29(5) (331KB)
  Castro, C., Dorris, G.M., Brouillette, F., Daneault, C.
• Alkaline pulping of portuguese eucalyptus globulus: effect on hexenuronic acid content, Journal of Pulp and Paper Science, May 2003, Vol. 29(5) (224KB)
  Pedroso, A.I., Carvalho, M.G.
• Coating layer formation and liquid-phase penetration in metered size press coating, Journal of Pulp and Paper Science, May 2003, Vol. 29(5) (710KB)
  Forsström, U., Saharinen, E., Dickson, R.J., Fagerholm, K.
• Chemical characterization of various types of mechanical pulp fines, Journal of Pulp and Paper Science, May 2003, Vol. 29(5) (299KB)
  Sundberg, A., Pranovich, A.V., Holmbom, B.

June

• Relationships between the coating surface structural variation and print quality, Journal of Pulp and Paper Science, June 2003, Vol. 29(6) (686KB)
  Chinga, G., Helle, T.
• Comparative studies of kraft and kraft–borate pulping of black spruce, Journal of Pulp and Paper Science, June 2003, Vol. 29(6) (270KB)
  Bujanovic, B., Cameron, J.H., Yilgor, N.
• Effects of mud washing and calcining temperature on lime properties, Journal of Pulp and Paper Science, June 2003, Vol. 29(6) (317KB)
  Dorris, G.M.
• Modelling of complexation of metal ions in pulp suspensions, Journal of Pulp and Paper Science, June 2003, Vol. 29(6) (497KB)
  Räsänen, E., Kärkkäinen, L.
• Attenuated total reflection uv spectroscopy for simultaneous analysis of alkali, sulphide and dissolved lignin in pulping liquors, Journal of Pulp and Paper Science, June 2003, Vol. 29(6) (353KB)
  Chai, X.S., Zhu, J.Y., Luo, Q., Li, J.
• Relationship between the alkali solubility of hemicelluloses and lignin from unbleached hardwood kraft pulp and pulp bleachability, Journal of Pulp and Paper Science, June 2003, Vol. 29(6) (460KB)
  Bikova, T., Treimanis, A., Eisimonte, M., Klevinska, V.

July

• Colour speck counter for assessing the dirt level in secondary fibre pulps, Journal of Pulp and Paper Science, July 2003, Vol. 29(7) (253KB)
  Verikas, A., Malmqvist, K., Bergman, L., Engstrand, P.
• Changes in the time of flight of a laser pulse during paper compression, Journal of Pulp and Paper Science, July 2003, Vol. 29(7) (306KB)
  Saarela, J., Myllylä, R.
• Lumen loading with calcium carbonate fillers, Journal of Pulp and Paper Science, July 2003, Vol. 29(7) (577KB)
  Middleton, S.R., Desmeules, J., Scallan, A.M.
• A simplified network model for mechano-sorptive creep in paper, Journal of Pulp and Paper Science, July 2003, Vol. 29(7) (330KB)
  Alfthan, J.
• Effect of Drying and Fibre Chemical Composition on the Creep Strain of Paper, Journal of Pulp and Paper Science, July 2003, Vol. 29(7) (560KB)
  Zhang, G., Niskanen, K., Tanaka, A., Keränen, J., Timofeev, O.
• An improved method for isolating lignin in high yield and purity, Journal of Pulp and Paper Science, July 2003, Vol. 29(7) (273KB)
  Wu, S., Argyropoulos, D.S.

August

• Influence of surface-induced nonuniform reflectance on the diffuse reflectance factor.part ii: experimental verification on coated substrates, Journal of Pulp and Paper Science, August 2003, Vol. 29(8) (223KB)
  Granberg, H., Rundlöf, M., Mattsson, L.
• Discovery and use of simple fibre-reactive yellowing inhibitors, Journal of Pulp and Paper Science, August 2003, Vol. 29(8) (807KB)
  Hu, T.Q.
• A simple, direct method for measurement of microfibril angle in single fibres using differential interference contrast microscopy, Journal of Pulp and Paper Science, August 2003, Vol. 29(8) (600KB)
  Peter, G.F., Benton, D.M., Bennett, K.
• Influence of surface-induced nonuniform reflectance on the diffuse reflectance factor. part i: model predictions, Journal of Pulp and Paper Science, August 2003, Vol. 29(8) (205KB)
  Granberg, H., Rundlöf, M., Mattsson, L.
• Evaluation of polymer efficiency in pitch control with a laser–optical resin particle counter, Journal of Pulp and Paper Science, August 2003, Vol. 29(8) (404KB)
  Yu, L., Allen, L.H., Esser, A.
• Influence of abietic acid, betulinol, sodium oleate and tripalmitine on the migration of akd in paper, Journal of Pulp and Paper Science, August 2003, Vol. 29(8) (463KB)
  Mattsson, R., Lindström, D., Sterte, J., Ödberg, L.

September

• Spectroscopic determination of anthraquinone in kraft pulping liquors using a nafion membrane interface, Journal of Pulp and Paper Science, September 2003, Vol. 29(9) (418KB)
  Yang, X.T., Chai, X.-S., Hou, Q.X., Zhu, J.Y., Danielsson, L.-G.
• Alkali impregnation of hardwoods. part i: moderate treatment of poplar wood, Journal of Pulp and Paper Science, September 2003, Vol. 29(9) (370KB)
  Zanuttini, M., Marzocchi, V., Citroni, M., Mocchiutti, P.
• Salient reactions in lignin during pulping and oxygen bleaching: an overview, Journal of Pulp and Paper Science, September 2003, Vol. 29(9) (304KB)
  Argyropoulos, D.S.
• Laser ultrasonic system for on-line measurement of elastic properties of paper, Journal of Pulp and Paper Science, September 2003, Vol. 29(9) (435KB)
  Ridgway, P.L., Russo, R.E., Lafond, E.F., Habeger, C.C., Jackson, T.
• Distribution of dissolved and colloidal substances in the forming and press sections of a paper machine, Journal of Pulp and Paper Science, September 2003, Vol. 29(9) (222KB)
  Donat, V., van de Ven, T.G.M., Paris, J.
• Recycle of thermomechanical pulp filtrate after the removal of metals: a study with edta, Journal of Pulp and Paper Science, September 2003, Vol. 29(9) (377KB)
  Ager, P., Marshall, W.

October

• Possibilities for increasing the effectiveness of oxygen delignification of hardwood kraft pulp, Journal of Pulp and Paper Science, October 2003, Vol. 29(10) (203KB)
  Nenkova, S., Valchev, I., Simeonova, G.
• Determination of lignin distribution in pulps by ftir atr spectroscopy, Journal of Pulp and Paper Science, October 2003, Vol. 29(10) (387KB)
  Jääskeläinen, A.-S., Nuopponen, M., Axelsson, P., Tenhunen, M., Löija, M., Vuorinen, T.
• Modelling paper structure and paper–press interactions, Journal of Pulp and Paper Science, October 2003, Vol. 29(10) (594KB)
  Provatas, N., Uesaka, T.
• On the mobility of flowing papermaking suspensions and its relationship to formation, Journal of Pulp and Paper Science, October 2003, Vol. 29(10) (406KB)
  Martinez, D.M., Kiiskinen, H., Ahlman, A-K., Kerekes, R.J.
• Black liquor gasification with direct causticization using titanates in a pressurized entrained-flow reactor. part ii: carbon and carbon species transitions, Journal of Pulp and Paper Science, October 2003, Vol. 29(10) (616KB)
  Nohlgren, I., Sricharoenchaikul, V., Sinquefield, S., Theliander, H., Frederick, W.J.
• Chemistry of mediated-laccase delignification analyzed by pyrolysis–gc/ms, Journal of Pulp and Paper Science, October 2003, Vol. 29(10) (618KB)
  Tamminen, T., Kleen, M., Ohra-Aho, T., Poppius-Levlin, K.

November

• Simultaneous quantification of residual lignin and hexenuronic acid from chemical pulps with uv resonance raman spectroscopy and multivariate calibration, Journal of Pulp and Paper Science, November 2003, Vol. 29(11) (371KB)
  Saariaho, A.M., Hortling, B., Jääskeläinen, A.S., Tamminen, T., Vuorinen, T.
• Floc rupture in extensional flow, Journal of Pulp and Paper Science, November 2003, Vol. 29(11) (202KB)
  James, D.F., Yogachandran, N., Loewen, M.R., Liu, H., Davis, A.M.J.
• A raman spectroscopic study of migration in paper coatings, Journal of Pulp and Paper Science, November 2003, Vol. 29(11) (379KB)
  Bitla, S., Tripp, C.P., Bousfield, D.W.
• Quantification of the intrinsic error of the kubelka–munk model caused by strong light absorption, Journal of Pulp and Paper Science, November 2003, Vol. 29(11) (230KB)
  Granberg, H., Edström, P.
• Surface texture controlling speckle-type print defects in a hard printing nip, Journal of Pulp and Paper Science, November 2003, Vol. 29(11) (1026KB)
  Yan, N., Aspler, J.
• Measuring softwood yield gain at kraft pulp mills, Journal of Pulp and Paper Science, November 2003, Vol. 29(11) (327KB)
  Luthe, C., Berry, R.M., Radiotis, T., Nadeau, L.

December