2003

Login

Information For

Home / Bookstore / Technical Papers / Journal Articles / TAPPI JOURNAL / Archives / 2003

TAPPI JOURNAL 2003 Archives

January

Economic benefits achieved from an odor reduction project, Solutions! & TAPPI JOURNAL, January 2003 (531KB)
Ramsay, K., Manolescu, D., Wentzell, P., Winik, C.
Determination of kappa number reduction in pulp and COD in bleach plant effluents using multiwavelength spectrometry and multivariate calibration, Solutions! & TAPPI JOURNAL, January 2003 (743KB)
Sparén, A., Renberg, L., Furusjö, E., Hillforth, C.A., Danielsson, L.G.
FT-Raman spectroscopy for direct measurement of lignin concentrations in kraft pulps, Solutions! & TAPPI JOURNAL, January 2003 (561KB)
Agarwal, U.P., Weinstock, I.A., Atalla, R.H.
Influence of cooking variables in the organosolv pulping of wheat straw using mixtures of ethanol, acetone, and water, Solutions! & TAPPI JOURNAL, January 2003 (653KB)
Alcaide, L.J., Dominguez, J.C.G., Pérez, OT, I.P.
TAPPI JOURNAL, January 2003 (4.5MB Download)
Field test of sodium bicarbonate and liquid CO₂ use for accelerating char bed cooling, Solutions! & TAPPI JOURNAL, January 2003 (998KB)
Grace, T.M., Tran, H., Kawaji, M.

February

Expanding your knowledge base, TAPPI JOURNAL, February 2003, Vol. 2(2) (74KB)
Meadows, D.G.
Paper properties and swelling properties of ozone-based ECF bleached softwood kraft pulps, Solutions! & TAPPI JOURNAL, FEB 2003 (92KB)
Toven, K.
Factors contributing to calcium oxalate scale at the Simpson Tacoma Kraft mill, Solutions! & TAPPI JOURNAL, February 2003, Vol. 2(2) (247KB)
Reid, D.W., Hinck, M.L.
Recovery boiler furnace as concentrated NCG incinerator, Solutions! & TAPPI JOURNAL, February 2003, Vol. 2(2) (29KB)
Janka, K, Tamminen, A.
Mill system closure and trash catching porous fillers in papermaking, Solutions! & TAPPI JOURNAL, February 2003, Vol. 2(2) (428KB)
Bourassa, C., Diamond, M., Sain, M., Daneault, C.
Comprehensive model of alkali–salt deposition in recovery boilers, Solutions! & TAPPI JOURNAL, February 2003, Vol. 2(2) (421KB)
Wessel, R.A., Baxter, L.L.
Influence of impulse drying on the retention and sizing of paper with alkyl ketene dimer, Solutions! & TAPPI JOURNAL, February 2003, Vol. 2(2) (136KB)
Mendes, P., Xiao, H., Costa, C.A.V., Belgacem, M.N., Roberts, J.C.
Internet based, interactive simulation: the concept and an evaporator example, Solutions! & TAPPI JOURNAL, February 2003, Vol. 2(2) (147KB)
Gu, Y., Malmberg, B., Edwards, L.

March

An introduction, an invitation, TAPPI JOURNAL, March 2003, Vol. 2(3) (78KB)
Bottiglieri, J.
The nature of strength reduction when newsprint is calendered, Solutions! & TAPPI JOURNAL, March 2003, Vol. 2(3) (174KB)
Burnett, R., I’Anson, S.J.
Evaluation of a laser-optical resin particle counter, Solutions! & TAPPI JOURNAL, March 2003, Vol. 2(3) (239KB)
Yu, L., Allen, L.H., Esser, A.
A novel device to measure pulp fiber hydrodynamics, Solutions! & TAPPI JOURNAL, March 2003, Vol. 2(3) (225KB)
Wong, B.T.B, Green, S.I.
Monitoring the pH and conductivity of dielectric pulps using the ISO and IEC Standard Guidelines, TAPPI JOURNAL, March 2003, Vol. 2(3) (87KB)
Nogueira, J.M.F., Freitas, M., Gonçalves, M.
The role of evaporative dewatering in impulse pressing, TAPPI JOURNAL, March 2003, Vol. 2(3) (185KB)
Lucisano, M.F.C., Petrini, J.B., Martin, A.R.
Enhancing kraft pulping through unconventional, higher sulfide-containing pretreatment liquors–A review, TAPPI JOURNAL, Online Exclusive, March 2003, Vol. 2(3) (347KB)
Ban, W., Lucia, L.A.
Minimizing baso₄ scale formation In ecf bleach plants, Solutions! & TAPPI JOURNAL, March 2003, Vol. 2(3) (119KB)
Bryant, P.S., Samuelsson, Å, Basta, J.

April

Selective removal of chloride and potassium in kraft pulp mills, Solutions! & TAPPI JOURNAL, April 2003, Vol. 2(4) (141KB)
Ferreira, L.MG.A, Soares, M.A.R., Egas, A.P.V., Castro, J.A.A.M.
Biodegradation of spent pulping liquor lignins under mesophilic and thermophilic anaerobic conditions, Solutions! & TAPPI JOURNAL, April 2003, Vol. 2(4) (178KB)
Tartakovsky, B., Cimpoia, R., Petti, L., Lo, A., Liard, A., Guiot, S.R.
Sharing the wealth—and keeping it, TAPPI JOURNAL, April 2003, Vol. 2(4) (77KB)
Bottiglieri, J.
A sensor for microstickies, TAPPI JOURNAL, Online Exclusives, April 2003, Vol. 2(4) (174KB)
Koskinen, J.T., Sung, D.J., Kazi, F., Yang, J., Banerjee, S.
Modeling coating structure development using a Monte Carlo deposition method Part 1: Modeling methodology, Solutions! & TAPPI JOURNAL, April 2003, Vol. 2(4) (431KB)
Vidal, D., Zou, X, Uesaka, T.
Sizing variations of dispersed rosin sizes with fortification, hardness, pH, and temperature, Solutions! & TAPPI JOURNAL, April 2003, Vol. 2(4) (93KB)
Nitzman, A.F., Royappa, A.T.
Use of computational fluid dynamics to investigate natural and mechanically induced flows in an aerated lagoon, Solutions! & TAPPI JOURNAL, April 2003, Vol. 2(4) (364KB)
de Kretser, D., Matthews, B., Williams, M.
The influence of dextran molecular weight on the dry strength of dextran-impregnated paper, Solutions! & TAPPI JOURNAL, April 2003, Vol. 2(4) (197KB)
Pelton, R., Zhang, J., Chen, N., Moghaddamzadeh, A.
Effect of clay-stickie interaction on centrifugal cleaner efficiency, TAPPI JOURNAL, April 2003, Vol. 2(4) (180KB)
Yang, J., Banerjee, S.

May

Membership has its privileges, TAPPI JOURNAL, May 2003, Vol. 2(5) (77KB)
Bottiglieri, J.
Hexenuronic acid contents of eucalyptus globulus kraft pulps: variation with pulping conditions and effect on ecf bleachability, Solutions! & TAPPI JOURNAL, May 2003, Vol. 2(5) (188KB)
Daniel, A.I.D., Neto, C.P., Evtuguin, D.V., Silvestre, A.J.D.
Application of yellowing inhibitors to improve the brightness stability of coated mechanical papers , Solutions! & TAPPI JOURNAL, May 2003, Vol. 2(5) (195KB)
Yuan, Z., Schmidt, J., Heitner, C., Fairbank, M.
Modeling coating structure development using a monte carlo deposition method part 2: validation of the model and case study, TAPPI JOURNAL, May 2003, Vol. 2(5) (262KB)
Vidal, D., Zou, X., Uesaka, T.
A brominated methylethylhydantoin slimicide in a tissue mill, TAPPI JOURNAL, May 2003, Vol. 2(5) (179KB)
Knapick, E.G., Anker, L.S., Knauer, K.E., Pidane, K.W.
A novel, non-mechanical method for producing matte and dull papers with exceptional print gloss, TAPPI JOURNAL, May 2003, Vol. 2(5) (488KB)
Fu, Z., Brown, J.T.
On-site aerobic treatment at high and varying process water temperatures, TAPPI JOURNAL, Online Exclusive, May 2003, Vol. 2(5) (248KB)
Suvilampi, J.E., Rintala, J.A., Nuortila-Jokinen, J.M.K.

June

Influence of fines on sheet delamination in condebelt drying and recyclability of condebelt-dried linerboard, Solutions! & TAPPI JOURNAL, June 2003, Vol. 2(6) (158KB)
Lee, H.L., Jung, T.M., Youn, H.J., Ham, C.H., Kim, J.D.
Imbibition behavior of offset inks part 1: Gravimetric determination of oil imbibition rate into pigmented coating structures , Solutions! & TAPPI JOURNAL, June 2003, Vol. 2(6) (195KB)
Schoelkopf, J., Gane, P.A.C., Ridgway, C.J., Spielmann, D.C., Matthews, G.P.
Offset ink tack and rheology correlation part 1: ink rheology as a function of concentration , TAPPI JOURNAL, Online Exclusive, June 2003, Vol. 2(6) (211KB)
Gane, P.A.C., Matthews, G.P., Schoelkopf, J.
Characterization of kenaf by chemimechanical pulping, Solutions! & TAPPI JOURNAL, June 2003, Vol. 2(6) (418KB)
Law, K., Lanouette, R., Mama Sarr, N.D.
Virtual Bleach Plants part 1. mill applications, Solutions! & TAPPI JOURNAL, June 2003, Vol. 2(6) (144KB)
Gu, Y., Edwards, L.
The kraft pulping properties of Canadian red and sugar maple, Solutions! & TAPPI JOURNAL, June 2003, Vol. 2(6) (823KB)
Watson, P., Hussein, A., Reath, S., Gee, W., Hatton, J., Drummond, J.

July

The best of the best, TAPPI JOURNAL, July 2003, Vol. 2(7) (78KB)
Bottiglieri, J.
Changes of paper properties of nonwood pulp on recycling, Solutions! & TAPPI JOURNAL, July 2003, Vol. 2(7) (105KB)
Jahan, M.S.
Maximization of profit through optimal selection of inventory levels and production rates in pulp and paper mills, Solutions! & TAPPI JOURNAL, July 2003, Vol. 2(7) (166KB)
Sarimveis, H., Angelou, A., Retsina, T.
Imbibition behavior of offset inks part 2: gravimetric determination of ink imbibition rate into pigmented coating structures , Solutions! & TAPPI JOURNAL, July 2003, Vol. 2(7) (202KB)
Schoelkopf, J., Gane, P.A.C., Ridgway, C.J.
Offset ink tack and rheology correlation part 2: determining in real time the solids content of ink-on-paper using the ink tack force-time integral, TAPPI JOURNAL, Online Exclusive, July 2003, Vol. 2(7) (267KB)
Gane, P.A.C., Matthews, G.P., Schoelkopf, J.
Factors affecting fatty acid oxidation and the formation of odorous aldehydes during tmp production, Solutions & TAPPI JOURNAL, July 2003, Vol. 2(7) (99KB)
Øyaas, K.
Deinking of recycled mixed office paper using two endo-glucanases, celb and cele, from the anaerobic fungus orpinomyces pc-2, Solutions! & TAPPI JOURNAL, July 2003, Vol. 2(7) (108KB)
Geng, X., Li, K.
Virtual bleach plants, part 2: unified clo₂ and cl₂ bleaching model, Solutions! & TAPPI JOURNAL, July 2003, Vol. 2(7) (141KB)
Gu, Y., Edwards, L.

August

Every day, for (career) health, TAPPI JOURNAL, August 2003, Vol. 2(8) (83KB)
Bottiglieri, J.
Determination of load-bearing element length in paper using zero/short span tensile testing, Solutions! & TAPPI JOURNAL, August 2003, Vol. 2(8) (1132KB)
Batchelor, W.
Data for better maintenance plans and investments policy, Solutions! & TAPPI JOURNAL, August 2003, Vol. 2(8) (354KB)
Kortelainen, H., Kupila, K., Silenius, S., Päivike, A.
Chemical treatment in mechanical pulping, part 5: sulfite pretreatment, Solutions! & TAPPI JOURNAL, August 2003, Vol. 2(8) (179KB)
Xu, E.C.
Offset ink concentration profile during vehicle imbibition into coated paper, Part 3: Proposing a viscous gradient model, TAPPI JOURNAL, Online Exclusive, August 2003, Vol. 2(8) (384KB)
Schoelkopf, J., Gane, P.A.C.
Development of watermark quality measurement by image analysis, Solutions! & TAPPI JOURNAL, August 2003, Vol. 2(8) (261KB)
Trepanier, R.J., Perron, D.
Reduction of manganese in brownstock—laboratory study and mill trial results, Solutions! & TAPPI JOURNAL, August 2003, Vol. 2(8) (145KB)
Wohlgemuth, G., Mannisto, E.H., Yaraskavitch, I.M., Jack, D.
Bleaching study of kenaf mechanical pulps, Solutions! & TAPPI JOURNAL, August 2003, Vol. 2(8) (167KB)
Mohta, D.C., Roy, D.N., Whiting, P.

September

A new retention aid for the production of SC printing grades: pilot paper machine results, Solutions! & TAPPI JOURNAL, September 2003, Vol. 2(9) (255KB)
Polverari, M., Hamel, J., Sitholé, B., Allen, L.
Potential of mimosa (albizia julibrissin ) for papermaking, Solutions! & TAPPI JOURNAL, September 2003, Vol. 2(9) (150KB)
Duke, S.R., Reed, P.J., Gu, H., Krishnagopalan, G., Morrison, T.A., Bransby, D.I.
Dynamic modeling of agitated pulp stock chests, TAPPI JOURNAL, September 2003, Vol. 2(9) (398KB)
Ein-Mozaffari, F., Kammer, L.C., Dumont, G.A., Bennington, C.P.J.
Behavior of certain components in the vacuum drum washer after the first D stage in ECF bleaching, Solutions! & TAPPI JOURNAL, September 2003, Vol. 2(9) (172KB)
Sillanpää, M., Sankari, M., Dahl, O., Ala-Kaila, K.
Mechanism of hydrogen peroxide decomposition by manganese dioxide, Solutions! & TAPPI JOURNAL, September 2003, Vol. 2(9) (193KB)
Wekesa, M., Ni, Y.
Pulp yield loss in alkaline peroxide bleaching of aspen CTMP Part 1: Estimation and impacts, Solutions! & TAPPI JOURNAL, September 2003, Vol. 2(9) (145KB)
Pan, G.X.
Selective refining actions on repulped long-fiber kraft paper, TAPPI JOURNAL, Online Exclusive, September 2003, Vol. 2(9) (856KB)
Formento, J.C., Maximino, M.G., Adell, A.A., Taleb, M.C.

October

Getting ahead, staying ahead, TAPPI JOURNAL, October 2003, Vol. 2(10) (77KB)
Bottiglieri, J.
Measurements of pressure pulses from a solid core screen rotor, Solutions! & TAPPI JOURNAL, October 2003, Vol. 2(10) (336KB)
Pinon, V., Gooding, R.W., Olson, J.A.
An examination of two hybrid top-wire former configurations for producing newsprint, Solutions! & TAPPI JOURNAL, October 2003, Vol. 2(10) (300KB)
Wildfong, V., Genco, J.M.
Combustion properties of black liquors from alkaline pulping of wheat straw and reed canary grass, TAPPI JOURNAL, Online Exclusive, October 2003, Vol. 2(10) (216KB)
Louhelainen, J., Alén, R., Feng, Z.
Virtual bleach plants, Part 3: Caustic extraction and peroxide bleaching models, Solutions! & TAPPI JOURNAL, October 2003, Vol. 2(10) (280KB)
Gu, Y., Edwards, L.L.
Papermaking properties and morphology of cellulose fiber recovered from municipal solid waste, TAPPI JOURNAL, October 2003, Vol. 2(10) (320KB)
Ashley, C.R., Hodgson, K.T.
Fast determination of anionic groups in different pulp fiber by methylene blue sorption, Solutions! & TAPPI JOURNAL, October 2003, Vol. 2(10) (115KB)
Fardim, P., Holmbom, B.
Apparent and actual delignification response in industrial oxygen–alkali delignification of birch kraft pulp, Solutions! & TAPPI JOURNAL, October 2003, Vol. 2(10) (128KB)
Ala-Kaila, K., Li, J., Sevastyanova, O., Gellerstedt, G.

November

Current status of the pure oxygen activated sludge process in Canadian mills, Solutions! & TAPPI JOURNAL, November 2003, Vol. 2(11) (124KB)
Paice, M.G., Kovacs, T., Bergeron, J., O’Connor, B.
Spectroscopic characterization of extractives isolated with MTBE from straws, Solutions! & TAPPI JOURNAL, November 2003, Vol. 2(11) (130KB)
Sun, X., Sun, R.
Recovery of water-soluble acetylgalactoglucomannans from mechanical pulp of spruce, Solutions! & TAPPI JOURNAL, November 2003, Vol. 2(11) (145KB)
Willför, S., Rehn, P., Sundberg, A., Sundberg, K., Holmbom, B.
Virtually painless, TAPPI JOURNAL, November 2003, Vol. 2(11) (76KB)
Bottiglieri, J.
Analysis of laboratory beating by fiber settling time frequency distributions, Solutions! & TAPPI JOURNAL, November 2003, Vol. 2(11) (105KB)
Ghatak, H.R.
Fiber surface saturation as a strategy to optimize dual-polymer dry strength treatment, Solutions! & TAPPI JOURNAL, November 2003, Vol. 2(11) (156KB)
Hubbe, M.A., Jackson, T.L., Zhang, M.
Ring crush and short span compression for predicting edgewise compressive strength, Solutions! & TAPPI JOURNAL, November 2003, Vol. 2(11) (113KB)
Frank, B.
A review of gas flows in fiber suspensions, TAPPI JOURNAL, Online Exclusive, November 2003, Vol. 2(11) (775KB)
Heindel, T.J.

December

Genetic variation of juvenile wood properties in a loblolly pine progeny test, Solutions! & TAPPI JOURNAL, December 2003 (235KB)
Sykes, R., Isik, F., Li, B., Kadla, J., Chang, H.M.
Modifying boiler operation to reduce primary air port cracking in a recovery boiler, Solutions! & TAPPI JOURNAL, December 2003 (732KB)
Tran, H., Vafa, S., Milbury, C., Blaney, B., Piroozmand, F., Roherty, A., Mott, D., Anderson, B., Ri
Formation of dissolved high molecular organic substances in the bleaching of softwood kraft pulp, Solutions! & TAPPI JOURNAL, December 2003 (161KB)
Germgård, U., Borén, I., Aleksic, S.
Vinylformamide-based cationic polymers as retention aids in alkaline papermaking, Solutions! & TAPPI JOURNAL, December 2003 (523KB)
Wang, F., Kitaoka, T., Tanaka, H.
Enhancing grade changes using dynamic simulation, TAPPI JOURNAL, Online Exclusive, December 2003, Vol. 2(12) (284KB)
Lappalainen, J., Myller, T., Vehviläinen, O., Tuuri, S., Juslin, K.
The behavior of fibers in wet pressing, Solutions! & TAPPI JOURNAL, December 2003 (270KB)
He, J., Batchelor, W.J., Johnston, R.E.
Calling all experts, TAPPI JOURNAL, December 2003, Vol. 2(12) (79KB)
Bottiglieri, J.

Indexing provided by Paperbase International, a comprehensive database of the pulp, paper and nonwovens industries.

Have You Heard?

More ...

From:
Email:
To:
Email:
Subject:
Message: