2012 TAPPI Best Practices on the Corrugator
Product code: 12BEST
Date: 2/14/2012 to 2/17/2012
Venue: Atlanta Marriott Norcross
Location: Norcross, GA United States
Contact: memberconnection@tappi.org
Phone: 1.800.332.8686 (US); 1.800.446.9431 (Canada); +1.770.446.1400
Fax: +1.770.209.7206
* Online registration has been shut down. If you'd like to attend this course, you can do so by registering onsite.
By attending the TAPPI Best Practices on the Corrugator, a range of plant employees will learn how to achieve higher productivity, better product quality and waste reduction during one comprehensive course.
- The TAPPI Best Practices on the Corrugator Course teaches participants how to understand each element within the corrugating process. They'll study the basics of how each component in the corrugator system works and how to run each component with optimum settings for peak performance. Both old and new equipment are covered.
- Participants develop an understanding of the critical properties of the raw materials that are vital to guarantee acceptable quality board. Course instructors teach participants how the “Centerline Process” can be adopted in their plant to achieve a product that is consistent every day and on all shifts.
- Participants will also learn the causes of excess waste and how to measure and eliminate this waste.
New for 2012!!
Video clips will be used to demonstrate defects in the making—and measures taken to resolve the defects.
WHY SHOULD YOU ATTEND
- Learn how to increase productivity, improve quality and minimize waste
- Take home new ideas and operational methods to improve production
- Share your specific problems and issues with the experts –Bring samples with you!
- Learn how you can maintain quality while reaching maximum corrugator speeds
- Find out how you can get the maximum yield of boxes from the paperboard consumed
- Identify how and where you can reduce excess waste
WHO SHOULD ATTEND
- Corrugator Operators
- Box Plant Supervisors
- Production Managers
- Staff Engineers
- Technical Service Managers in corrugated container plants and paper corporations
LEARNING OUTCOMES
After successfully completing this course, participants should be able to:
- Describe elements of the corrugating process.
- Troubleshoot the most common operational problems
- Recognize critical properties of paperboard, starch adhesive and how to control warp
LEVEL OF LEARNING
Introductory to Intermediate
Educational prerequisites, None
Registration Rates
Save on course fees by registering before January 13!
|
Prior to January 13 |
After January 13 |
| Members |
$1,095 |
$1,295 |
| Nonmembers |
$1,395 |
$1,595 |
| Group Discount Members (3 or more from the same company) |
$995 |
$1,195 |
| Group Discount Non-Members (3 or more from the same company) |
$1,295 |
$1,395 |
Not a TAPPI Member?
Join or renew your membership now ($174) and save on your registration fees for this course and many other valuable TAPPI events and publications.
CANCELLATION POLICY
If you find that you have to cancel, your full registration fee will be refunded if TAPPI’s Registration Department receives written notification (fax acceptable at +1.770.209.7206) by January 13, 2012. Please note: There will be a 50% refund for all written cancellations made after January 13, 2012, but no later than 5 business days prior to the start of the conference, February 7, 2011. Understandably, after this time, no refunds can be issued. Substitutions, however, will be accepted any time without a penalty.
REFUND POLICY
100% - Cancellation received by January 13, 2012
50% - Cancellations received after January 13, 2012 and no later than February 7, 2012
NO REFUND- Cancellations received after February 7, 2012
COURSE FACULTY
The TAPPI Best Practices on the Corrugator Course is taught by industry-renown instructors Rick Croker and John Buzzell. Croker has been in the corrugated industry for over 30 years. He is the Director of Technical Services for Georgia- Pacific Corporation. Buzzell is a Senior Field Service Technician for Georgia-Pacific Corporation with over 18 years experience in Sheetfeeder and Box Plant operations.
Guest speakers include: Mark Malinowski, President and CEO, MALINTECH, Inc.; Stephen Schmidt, Vice President, Copar Corporation; Paul Capozzi, Deublin; Jon Porter, Senior Trainer/ Process Specialist, Fosber America; John Donahue, President, Donahue and Associates; Pete Snyder, National Accounts, Harper/Love Adhesives; and Jack Westney, Georgia-Pacific.
Review the Proposed Course Schedule to see the valuable content being offered during this comprehensive three and a half days course.
CEUs
The Education Project Center of TAPPI has been reviewed and approved as an Authorized Provider by the International Association for Continuing Education and Training (IACET), 1620 I Street, NW, Suite 615, Washington, DC 20006. TAPPI will award 2.4 CEUs to participants who attend at least 80% of the educational sessions and complete a final program evaluation.
TAPPI PRESS Books Discounted With Registration
Pre-Order these books from TAPPI PRESS now at this special price and pick it up at registration when you arrive.
Corrugated Containers Manufacturing Process, The
0101R281
Conference Price: $35
(Regularly $185)
Authors: Jody A. Brittain, Stephen R. Perkins, and Philip G. Schnell
This comprehensive textbook describes the entire process of manufacturing corrugated containers. In addition to detailed explanations, the book also features practical troubleshooting tips, and a discussion of common problems and solutions within each major section.
Corrugated Defect/Remedy Manual, Sixth Edition
0101R153
Conference Price: $85
(Regularly $130)
Edited by James T. Carbone
This manual provides a basis for common knowledge of terms, definitions, and methods of correction of corrugated operational defects. The manual illustrates and provides causes and remedies for hundreds of defects affecting corrugated boxes. The manual is divided into four parts: Corrugated Problems; Printing Problems; Die Cutting Problems; and Finishing and Manufacturers’ Joint Problems.
Maintenance and Calibration Manuals for Rotary Diecutters and Flexo Glue Folder-Gluers
Item Number: 0101R245
Conference Price: $45
(Regularly $73)
By Roger Landrum
This two-volume set provides a comprehensive maintenance and calibration system that can help improve productivity and efficiency in corrugated box plants. One manual covers Rotary Diecutters while the other addresses Flexo Folder-Gluers. These manuals and corresponding checklists are designed to help any boxplant meet current ISO 9000 maintenance standards AND produce a higher quality product in a more productive efficient manner. If followed consistently, these proactive maintenance programs can reduce setup, rework and downtime.
Flexographic Terms: A Glossary of Terms Used In Flexographic Printing on Corrugated Board
Item Number: 0101R279
Conference Price: $22
(Regularly $42.50)
Edited by Joel J. Shulman
This glossary defines hundreds of terms commonly used in flexographic printing and pre-press operations. It will be a valuable reference for everyone involved in converting and printing.
Corrugator Monitor
Item Number: 0101R285
Conference Price: $25
(Regularly $38)
Prepared by Weyerhaeuser Company
This unique manual presents information on recognizing and correcting quality defects in combined board. Includes both English and Chinese translations.
Corrugated Crossroads: A Reference Guide for the Corrugated Containers Industry
Item Number: 0101R254
Conference Price: $80
(Regularly $121)
Written by John W. Koning, Jr.
This one-of-a-kind reference book will be a useful tool for everyone in the corrugated containers industry. The book features: general information, lists of standards, terms, definitions, references to TAPPI Test Methods and Technical Information Papers, and references to other publications. This reference guide contains detailed information on over 400 different terms commonly used in corrugated fiberboard manufacture.
Corrugated Major Components: Maintenance and Operating Guidelines, Second Edition
Item Number: 0101R226
Conference Price: $60
(Regularly: $93)
Edited by Clyde Cox, Chairman
This compilation of papers regarding many of the various components that make up a typical corrugator is intended to provide plant operating and maintenance personnel with a useful tool for training new employees. It also provides more experienced employees with some generally accepted good operating principles for the corrugator operation.
Hotel Information
Atlanta Marriott Norcross
475 Technology Parkway
Norcross, GA 30092
Hotel Website Telephone: +1.770.263.8558
Check-In: 3:00pm Check-Out: 12:00pm
Reservations
By Phone: (be sure to mention the TAPPI rate)
Property Direct: +1.770.263.8558
Property Toll Free Direct: +1.800.228.9290
TAPPI Corporate Rate: $109/night for a deluxe room
Includes: Complimentary internet and shuttle bus within 5 miles of hotel (including MARTA pickup)
Hotel Amenities Include: Business Center, ATM, Restaurant and Lounge, Coin Laundry, Gift Shop, Local Transportation, Multi-Lingual Staff, In-Room Safe, In-Room Coffee Maker, Hair Dryer, Ironing Board, Room Service, Fitness Room, and Pool
Directions to the Marriott Hotel:
TRAVELING NORTH ON I-85 (from airport)
Take I-85 North to I-285 West
Exit 31-B from I-285 (Peachtree Industrial Boulevard North)
Follow Peachtree Ind. Blvd. for 5 miles
Take LEFT fork in highway toward Hwy 141, Cumming
At third traffic light turn right on Technology Parkway
Entrance to Marriott Hotel is on the left
TRAVELING SOUTH ON I-85
Exit I-85 at Jimmy Carter Blvd (exit 99)
Turn Right off of exit
Continue to Peachtree Ind. Blvd and turn right
At next traffic light, turn left onto Holcomb Bridge Rd
Turn right at next traffic light onto GA-141 N/Peachtree Pkwy
At second traffic light turn right on Technology Parkway
Entrance to Marriott Hotel is on the left
TRAVELING SOUTH ON I-75
Follow I-75 and take I-285 EAST
Take Exit 31-B from I-285 (Peachtree Industrial Boulevard North)
Follow Peachtree Ind. Blvd. for 5 miles
Take LEFT fork in highway toward Hwy 141, Cumming
At third traffic light turn right on Technology Parkway
Entrance to Marriott Hotel is on the left
For more information, please contact Mary Beth Cornell at +1.770.209.7210 or mcornell@tappi.org.
Avis offers special discounts off regular rates for participants. To reserve your car, call 1.800.831.8000 and refer to the code AWD: #U226600.