Dirt Estimation Chart

TAPPI’s Dirt Chart cards are manufactured from an original negative produced on DuPont CRR film and estimate the equivalent black area (EBA) of dirt or other colored specks. The cards are processed on a rapid-access processor using Kodak/Fujifilm chemistry. Each card is produced on photographic paper via a contacting frame with an NuArc light source and NuArc light integrator which controls the specific exposure designated for accuracy and consistency. Cards are exposed to 20 units of light. To ensure the accuracy of the charts, each piece is measured by examining the 2.0 dot with a 100 x magnifier that has a reticle (scale) incremented in 5/10,000mm, on the lens. Card Stock. This opaque chart is to be used with TAPPI Test Methods T 213, T 437, and T 537.

You may also be interested in TAPPI’s size estimation charts. Developed from and based on the TAPPI Dirt Estimation Chart, this transparency is used to measure the size of spots, defects, or inclusions over the range of 0.02 to 5.00 square millimeters in paper and other industrial materials such as textiles or plastics. Developed from and based on the TAPPI Dirt Estimation Chart, this transparency is used to measure the size of spots, defects, or inclusions over the range of 0.02 to 5.00 square millimeters in paper and other industrial materials such as textiles or plastics. Developed from and based on the TAPPI Dirt Estimation Chart, this transparency is used to measure the size of spots, defects, or inclusions over the range of 0.02 to 5.00 square millimeters in paper and other industrial materials such as textiles or plastics.

Product code: 0109DIRT