Search

Use the search bar or filters below to find any TAPPI product or publication.

Showing 11–20 of 231 results (Duration : 0.013 seconds)
Journal articles
Magazine articles
Open Access
Preparation of regenerated cellulose from rice straw lignocellulosic waste and its use for reinforced paper products, TAPPI Journal July 2021

ABSTRACT: Rice straw waste is a lignocellulosic waste produced by farmers in large quantities. In this study, regenerated cellulose (RC) from rice straw was prepared by dissolving rice straw holocellulose (HC) in NaOH/Urea/Thio-urea/Water solution by the freeze-thawing process. The crystallinity index of RC was calculated at 31%, which is out of the crystallinity range of 39%•69% that has been previously suggested.The study indicated that the RC is amorphous with a low degree of polymerization (638) and higher hydroxyl group content as compared to HC. The fiber length of RC was found to be 26.7% shorter; however, the width of RC was 21.2% higher as compared to HC. Reduced kinked fiber content was observed in the fraction of RC (18.3%) as compared with HC (39.1%), and a higher curl index of fiber was observed more so in HC (10.5%) than RC (5.6%). Because of the regeneration process, the fiber length was reduced and a fines element content of about 96% was observed in RC compared to the initial fines content of HC (56.9%). Irrespective of the high fines element content of RC, the composite paper of rice straw bleached pulp and RC fibers was developed with an increase in the tensile index from 41.4 N.m/g to 71.2 N.m/g and an increase in the burst index from 4.7 kPa.m2/g to 5.3 kPa.m2/g with the addition of 5% and 15% RC, respectively. However, enhanced tear index of paper was observed up to 5% and then it declined upon further addition of RC. The study revealed that regenerated cellulose can be used as a strength additive to overcome the shortcomings of low mechanical properties in paper products.

Journal articles
Magazine articles
Open Access
Editor's Note: An Ideal Raw Material for Pulp and Paper, TAP

Editor's Note: An Ideal Raw Material for Pulp and Paper, TAPPI JOURNAL March 2010

Journal articles
Magazine articles
Open Access
Editor's Note: Recovery Boiler Insights, TAPPI JOURNAL Febru

Editor's Note: Recovery Boiler Insights, TAPPI JOURNAL February 2010

Journal articles
Magazine articles
The Future of Sustainability at Pulp and Paper Mills, Paper360º November/December 2021

The Future of Sustainability at Pulp and Paper Mills, Paper360º November/December 2021

Journal articles
Magazine articles
TAPPI Journal Summaries, Paper360º May/June 2021

TAPPI Journal Summaries, Paper360º May/June 2021

Journal articles
Magazine articles
Best Practices for Wastewater Treatment and Management, Pape

Best Practices for Wastewater Treatment and Management, Paper360º November/December 2016

Journal articles
Magazine articles
Open Access
Editorial: 2018 TAPPI Journal features diverse content, TAPPI Journal November 2018

Editorial: 2018 TAPPI Journal features diverse content, TAPPI Journal November 2018

Journal articles
Magazine articles
TAPPI Journal Summaries, Paper360º November/December 2020

TAPPI Journal Summaries, Paper360º November/December 2020