Develop Standards

Developing TAPPI Standards

Standards are of the utmost importance in the pulp, paper and converting industries as they have a serious impact on business and trade. As a member, you are eligible to get involved in the process of developing new Standards for the industry.

How to Propose new Standards

Are you interested in proposing a new Standard? We encourage members to consult our complete list of subject categories for Standards below, or view the PDF list.

If you have a general idea for a Standard, you can complete the New Idea Submission Form. We will review your idea and identify the right committee or group to work on your suggestion.

If you already further along, you can send an initial draft to standards@tappi.org. A Standards manager will then work with you to develop a Standard-Specific Interest Group (SSIG) for the new Standard. This will set in motion the development and review process, which is described in the Standards Guidelines.

TAPPI Standards Guidelines

If you are at the writing stage, or if you are the chairperson of a Standards working group, you can download a copy of our Regulations and Style Guidelines.

In this manual, you will find:

  • How to write a Standard Test Method using proper terminology and format
  • How to write TAPPI Standard Specifications, Glossaries and Guidelines using proper terminology and format
  • What requirements exist for precision statements in Official and Provisional Test Methods
  • A checklist to make sure all required sections have been included in a Standard draft
  • How working group chairperson, working groups and Standard-Specific Interest Groups (SSIGs) fit into the process of preparing a Standard
  •  How the balloting process works
  •  How to resolve comments and negative votes
Showing 131–140 of 301 results (Duration : 0.009 seconds)

Filters

Standards
Test Method T 700 om-93 "Withdrawn - Analysis of bleaching liquors by suppressed ion chromatography"

The document searched has been administratively withdrawn (which means it was withdrawn not for a technical reason, but for lack of timely review). Administratively withdrawn Standards and previous versions of Standards are not available on the web, but are available upon request. Administratively withdrawn and historical Standards are free to TAPPI members, and there is a US$ 10 charge per document for nonmembers. The numerical index for Standards (see links from the Standards page) shows all withdrawn documents (with a "wd" designation). To request administratively withdrawn or historical Standards, contact Standards at standards@tappi.org. NOTE: These documents are made available for reference purposes; withdrawn documents and previous versions of existing documents are NOT currently sanctioned by TAPPI or the technical experts who develop TAPPI Standards.

Standards
Flat crush test of corrugated board (flexible beam method), Test Method T 808 cm-15

Flat crush test of corrugated board (flexible beam method), Test Method T 808 cm-15

Standards
Edgewise compressive strength of corrugated fiberboard (short column test), Test Method T 811 om-23

Edgewise compressive strength of corrugated fiberboard (short column test), Test Method T 811 om-23

Standards
Bending stiffness, four point method, Test Method TAPPI/ANSI T 836 om-20

Bending stiffness, four point method, Test Method TAPPI/ANSI T 836 om-20

Standards
Measuring the Bond Strength of a Glued Manufacturer's Joint, Test Method T 837 wd-01 WITHDRAWN

The document searched has been administratively withdrawn (which means it was withdrawn not for a technical reason, but for lack of timely review). Administratively withdrawn Standards and previous versions of Standards are not available on the web, but are available upon request. Administratively withdrawn and historical Standards are free to TAPPI members, and there is a US$ 10 charge per document for nonmembers. The numerical index for Standards (see links from the Standards page) shows all withdrawn documents (with a "wd" designation). To request administratively withdrawn or historical Standards, contact Standards at standards@tappi.org. NOTE: These documents are made available for reference purposes; withdrawn documents and previous versions of existing documents are NOT currently sanctioned by TAPPI or the technical experts who develop TAPPI Standards.

Standards
Determining construction (nominal basis weight) of corrugated board, Test Method T 844 om-21

Determining construction (nominal basis weight) of corrugated board, Test Method T 844 om-21

Journal articles
Magazine articles
Standards
Open Access
On-machine visible dirt measurement on moving sheets and the relationships to standard laboratory methods, TAPPI Journal August 2020

ABSTRACT: There has been a proliferation of new sensors to measure on-machine dirt specks that employ different technologies and methodologies to perform measurements. The differences in the on-machine technologies are discussed in terms of the TAPPI and ISO standard laboratory test methods with respect to dirt detection using light reflected from, or light transmitted through, the sheet. Also discussed are the requirements for measuring sta-tistically representative areas of the sheet; the difference between the dirt physical size and Equivalent Black Area (EBA) size; and the implication of these issues when specifying cleanliness acceptance criteria.This technical brief describes on-machine visible dirt measurement’s relationship to standard laboratory testing.

Standards
Forming Insulating Boards for Physical Tests, Test Method T

Forming Insulating Boards for Physical Tests, Test Method T 1001 cm-00 WITHDRAWN

Standards
Drainage Time of Pulp for Insulating Board, Test Method T 1002 cm-00 WITHDRAWN

The document searched has been administratively withdrawn (which means it was withdrawn not for a technical reason, but for lack of timely review). Administratively withdrawn Standards and previous versions of Standards are not available on the web, but are available upon request. Administratively withdrawn and historical Standards are free to TAPPI members, and there is a US$ 10 charge per document for nonmembers. The numerical index for Standards (see links from the Standards page) shows all withdrawn documents (with a "wd" designation). To request administratively withdrawn or historical Standards, contact Standards at standards@tappi.org. NOTE: These documents are made available for reference purposes; withdrawn documents and previous versions of existing documents are NOT currently sanctioned by TAPPI or the technical experts who develop TAPPI Standards.

Standards
Testing of fiber glass mats: use of modified TAPPI procedures for sampling and lot acceptance, stiffness, tear resistance, and thickness, Test Method TAPPI/ANSI T 1006 sp-22

Testing of fiber glass mats: use of modified TAPPI procedures for sampling and lot acceptance, stiffness, tear resistance, and thickness, Test Method TAPPI/ANSI T 1006 sp-22

Inside this Section