|
|
|
| 1 |
Shiuli Mahmud, SUNY-ESF College
|
|
A Comparative Study of Different Fillers on Uncoated Eucalyptus Digital Printing Paper Properties - A Pilot Scale Approach
|
| P2.02 |
|
A Novel Ultrasonic Dynamic Drainage Tester
(Presentation)
|
| P27.01 |
|
Advanced Multivariable Fiber Orientation Control and Twist Optimization
(Presentation)
|
| C13.03 |
Robert D. Carney, Stowe Woodward/Mount Hope
|
|
Advancements in Composite Roll Cover Technology For Calender Applications
(Presentation)
|
| P10.04 |
|
Analysis of Sheet Variations – Insights of Two-Dimensional Residuals
|
| P15.06 |
|
Andritz LemaxX Spiral® 200 Series Refiner Plate Designs
|
| P2.01 |
Dr. Andreas Gorton-Hülgerth, Andritz AG
|
|
Application of Computational Fluid Dynamics in the Development and Optimization of Stock Preparation Equipment
(Presentation)
|
| C12.02 |
Douglas W. Bousfield, University of Maine
|
|
Application of Nano-Fibrillated Cellulose as a Paper Surface Treatment For Inkjet Printing
(Presentation)
|
| C10.01 |
Brian J. Ninness, Styron LLC
|
|
Aqueous Glue Setting in Double-Coated Paperboard Systems - The Impact of Application System and Individual Coating Layer Thickness on Glue Bond Formation
(Presentation)
|
| C8.02 |
Jouko T. Vyorykka, Dow Chemical USA
|
|
Aqueous Polyolefin Dispersion for Packaging Boards and Papers
(Presentation)
|
| NTSII.06 |
Aaron Hart, J. Rettenmaier USA
|
|
Arbocel UFC100 - Novel Ultrafine Plant Derived Cellulose Fiber for LWC and Board Coating
|
| NTSII.05 |
Tom Hannigen, Ashland Hercules Water Technologies
|
|
Ashland’s and Michelman’s New Water Based Barrier Systems Technology for Packaging
|
| C12.03 |
Chuck Klass, Klass Associates Inc.
|
|
Biobased Materials for Paper Coating
(Presentation)
|
| P23.02 |
Phil Prichard Ph.D., Philip M. Prichard LLC.
|
|
Case Histories: Biocide Interactions and Development of Microbial Tolerance/Resistance to Biocides in the Paper Making Process
|
| P15.03 |
Jussi Lahtinen, Runtech Systems
|
|
Clairefontaine PM 6, France - Energy Savings in Paper Machine Vacuum System
|
| P17.01 |
Kraig R. Kent, Ashland Hercules Water Technologies
|
|
Closed Loop Defoamer Control Stabilizes Paper Machine Operations
|
| C12.01 |
Johann Oberndorfer, Myllykoski Corporation; Phil Greenall, Steven Bloembergen, ECOSYNTHETIX INC.
|
|
Coating & Print Performance of Biobased Latex in European Graphic Papers
(Presentation)
|
| P17.02 |
Hank A. Brittain MSChE, PhD, Top Control, Inc.
|
|
Combat Process Disturbances and Interactions
(Presentation)
|
| P20.01 |
Mike J. Hendricks, BTG Americas Inc.
|
|
Consistency Measurement and Control in a Tissue Mill – The Often Neglected Parameter
(Presentation)
|
| C13.01 |
Mark D. Crable, Greenville Colorants
|
|
Continuous Coloration of Coatings for Coated Paper & Board
(Presentation)
|
|
Marty Hubbe, North Carolina State
|
|
Cost-Saving Strategies in Papermaking Chemistry – Mini-Course Version
|
|
Marty Hubbe, North Carolina State
|
|
Cost-Saving Strategies in Papermaking Chemistry – Mini-Course Version
|
| C8.04 |
Vesa Kunnari, VTT Technical Research Centre
|
|
Creating Printed Intelligence Using Novel Roll to Roll Surface Treatment Equipment - Two Case Studies
(Presentation)
|
| NTSI.10 |
Giovanni Cristini, Cristini
|
|
Cristini FiberScan Fix – Microwave Consistency Meter
|
| C13.02 |
Martin Schmid, Voith Paper Inc.
|
|
Curtain Coater as Air Knife Replacement
(Presentation)
|
| P23.04 |
Janet Woodward, Tod Stoner, Buckman
|
|
Deposit Analysis – Investigating Microbial Problems in a Paper Machine Environment
(Presentation)
|
| P20.03 |
Brian Christiansen, Andritz Pulp and Paper
|
|
Detailed Analysis of the Dewatering Process on a Crescent Former Tissue Machine
|
| 4 |
Teruaki Sato, McMaster University
|
|
DNA Aptamer Adsorption onto Cellulose
|
| P6.02 |
Paul Krochak, Mikael Ankerfors, Richard Holm PhD, Tom Lindstrom, Innventia
|
|
Drag Reduction Characteristics of Micro-Fibrillated Cellulose
(Presentation)
|
| NTSI.02 |
John Schwamberger, DuBois Chemicals
|
|
DuBois Chemicals’ Unique Press Felt Cleaning Methods Provide Productivity and Cost Savings
|
| NTSII.02 |
Mark Witort, Thwing-Albert Instrument Company
|
|
Dynamic Performance of Paper and Board
|
| P26.01 |
James R. Anderson, EKA Chemicals Inc.
|
|
Effective Paper Machine Slime Control and No Vapor Phase Corrosion
|
| P32.01 |
|
Effectiveness of Paper Dryer Journal Insulating Sleeves
(Presentation)
|
| C9.02 |
Catherine Ridgway, OMYA Development AG
|
|
Effects of Binders and Additives on Inkjet Coating Pigment Pore Structures
(Presentation)
|
| P28.02 |
Thomas Wroblewski P.E., CleanTech Partners
|
|
Energy Efficiency Frontier – Lean and Green Refining
(Presentation)
|
| P13.03 |
|
Energy Management and Optimization
(Presentation)
|
| NTSI.13 |
|
ENERGYmaestro – Empowering you
|
| P24.02 |
David G. McVey, Albany International
|
|
Enhanced Capabilities in Wet-end Paper Machine Clothing
(Presentation)
|
| P21.02 |
Ann-Charlotte Jansson, Linde AG/Linde Gas Division
|
|
Environmentally Friendly Process Improvements Using Carbon Dioxide
|
| P16.03 |
Asif Hasan, State University of New York
|
|
Environmentally Friendly Wet-End Paper Reinforcement Agents
(Presentation)
|
| 3 |
Yizhou Sang, The University of British Columbia
|
|
Experimental Investigation and Mathematical Modeling of PCC Flocculation Induced by Starch/Silica System
|
| P6.01 |
Daniel Söderberg, Innventia
|
|
Fluid Dynamic Challenges in Future Nano Fiber Cellulose Processes
|
| P20.02 |
Bruce Janda, AstenJohnson
|
|
Forming Fabric Applications for Tissue Making
|
| C10.03 |
|
From Theory to Practice - Improving the Foldcrack Resistance of Industrially Produced Triple Coated Paper
(Presentation)
|
| C9.03 |
Benny Hallam, Imerys Minerals Ltd.; Peter Vukusic, University of Exeter
|
|
Future Coating Designs for Enhanced Optics – Taking Lessons from Nature
(Presentation)
|
| P27.02 |
|
Gain Delay Retune in Multivariable Controls for the Papermaking Process
(Presentation)
|
| P16.02 |
Victor Hugo Ordonez, VH BIOTECHNOLOGY, Inc.
|
|
Green Technology - Last Developments in Enzymes For Paper Recycling
(Presentation)
|
| P5.02 |
Stephane Menard, Ashland Hercules Water Technologies
|
|
High Ash Copy Paper – A New Approach
(Presentation)
|
| P28.01 |
Mike Pemberton, ITT PPS Energy Performance Services
|
|
Holistic Pump System Designs to Optimize System Efficiency and Life Cycle Performance
(Presentation)
|
| P24.01 |
Oliver Baumann, Xerium Technologies
|
|
How Can a Forming Fabric Reduce Energy Consumption in the Forming Section?
(Presentation)
|
| P8.01 |
|
How to Manage Clothing to Optimize Machine Performance
|
| P8.04 |
Daryl Wells, AstenJohnson
|
|
How to Manage Clothing to Optimize Machine Performance
|
| 7 |
Levente Csoka, University of West Hungary
|
|
Hydrodynamic Cavitation Digested Wheat Straw and Biogas Production From the Residue
|
| C6.02 |
Janet S. Preston, IMERYS Minerals Ltd.
|
|
Impact of Pigment Blend and Binder Level on the Structure and Printability of Coated Papers
(Presentation)
|
| M3.01 |
Dan Maheu, President/COO, Smart Paper Holdings LLC
|
|
Implementing an Industrial Smart Metering System
(Presentation)
|
| P13.01 |
Paul Austin, Perceptive Engineering
|
|
Improved Efficiency and Reduced Energy Use in Papermaking Using Advanced Process Control
(Presentation)
|
| P4.02 |
Grant Forrest, Domtar - Johnsonburg, PA
|
|
Improving and Maintaining High Papermachine Efficiency
|
| P29.02 |
Kari K. Hilden, Papertech Inc.
|
|
Improving Papermaking & Coating Efficiency with Web Inspection Cameras
(Presentation)
|
| P6.03 |
Juha Salmela, VTT Technical Research Centre of Finland
|
|
Laboratory-Scale Pipe Rheometry - A Study of a Microfibrillated Cellulose Suspension
(Presentation)
|
| P12.03 |
Rebecca Harper, Mike Benton, AstenJohnson, Inc.
|
|
Lean Journey
|
| NTSI.07 |
Eric Reber, Mahlo America
|
|
Mahlo Introduces Revolutionary New On-line Sensor Technologies for the Paper Industry
|
| C6.01 |
Daniel H. Varney, OMYA Inc.
|
|
Main Coating Parameters Affecting the Surface Strength of Sheet Offset Paper
(Presentation)
|
| P27.03 |
Frederic Parent, FPInnovations
|
|
Measurement and Correction of Baggy Edges on Paper Machines
(Presentation)
|
| P23.01 |
Jim Anderson, Eka Chemicals
|
|
Minimizing Microbes and Maximizing Profits
|
| P14.01 |
Dr. Melur K. Ramasubramanian, North Carolina State
|
|
Modeling and Simulation of the Creping Process
|
| NTSII.08 |
|
Monitoring Plastic Contamination in Pulp Furnishes for Coated Paper & Board Grades
|
| 5 |
Steven Edwards, Cellulose Sciences International
|
|
Nanoporous Cellulose - A New Fiber
|
| P2.03 |
|
New Insights into Gap Forming of Lightweight Containerboard
(Presentation)
|
| NTSI.04 |
Michael Molter, BTG Americas
|
|
New Optical Sensors with Real-Time Measurement of Ash and Total Consistency Throughout the Papermaking Process
|
| P14.03 |
Robert H. Pelton, McMaster University
|
|
New Polymers for Wet Strength – An Academic Perspective
|
| P5.03 |
Ross T. Gray, Nalco Company
|
|
New Technology for Increased Filler Usage and Fiber Savings in Graphic Grades
(Presentation)
|
| NTSI.05 |
Charles H. Wunner, CVN Vooner Paper Machinery
|
|
New 'Vooner Vac' Vacuum Pumps
|
| NTSII.09 |
|
Next Generation High Efficiency Binders
|
|
|
Nip Dewatering - A Press Fabric Perspective
|
| NTSI.01 |
Brad Robillard, Beta LaserMike
|
|
Non-Contact, Laser-Based Technology for Accurately Measuring the Length and Speed of Product in Paper Production
|
| P6.04 |
Mark Martinez, University of British Columbia
|
|
Novel Fractionation Techniques - Fractionation of MFC Suspensions
(Presentation)
|
| NTSII.01 |
|
Novel VAE Binder for Paper Coating
|
| P10.02 |
Danlei Chu, Honeywell Inc.
|
|
Online CD Performance Monitoring and Automatic Alignment
(Presentation)
|
| P10.03 |
Kimmo Konkarikoski, Tampere University of Technology
|
|
Optimal Quality Limits for On-line Measurements
(Presentation)
|
| C10.02 |
Christopher Nutbeem, IMERYS Minerals Ltd.
|
|
Optimized Precoats for Multilayer Coating
(Presentation)
|
| NTSI.09 |
Kerin Lester, SoniSys, Inc.
|
|
OPUS 3-D - A Unique Innovation in Non-Destructive Testing
|
| P32.03 |
Jochen Struck, RTS Alliance
|
|
Original Ruby Nozzle Technology for Improved Wet End Edge Trimming and for Oscillating HP Showers
(Presentation)
|
| P8.03 |
|
Paper Machine Clothing Trends in Today’s American Market
|
| P14.02 |
Dave W. Loebker PhD, Procter & Gamble Company
|
|
Paper Towel Absorptive Properties - Analytical Measurement and Consumer Preference
(Presentation)
|
| P29.01 |
Keith R. Masters, ABB Inc.
|
|
Papermaker’s Experience with State-of-the-Art Automation
(Presentation)
|
| P15.02 |
Dick Reese, Dick Reese and Associates Inc.
|
|
Papermaking Energy Case Histories
|
| P1.01 |
Jeff Levensailor Sr., Domtar Paper
|
|
Papermaking Excellence Keynote
|
| NTSII.10 |
Heikki Mustalahti, ACA Systems
|
|
Permi - Online Porosity Analyzer for Coated and Uncoated Papers
|
| P24.04 |
Haiya Peng, University of British Columbia
|
|
PIV Measurements of Flow Immediately Above Woven Fabrics
(Presentation)
|
|
Eric Serenius, Daetwyler R&D Corporation
|
|
Printed Electronics and Gravure
|
| P32.02 |
Erkki Jaatinen, Metso Automation USA Inc.
|
|
Process Operators and Maintenance Staff Work Hand-in-Hand with DCS-Embedded Condition Monitoring
(Presentation)
|
| NTSII.04 |
Gabriel Foglia, Dupont Soy Polymers
|
|
Pro-Cote® 4610E & 5000E are REACH Friendly
|
| NTSII.03 |
|
Production Inkjet - The Market, Technology & Pigments
|
| NTSII.07 |
|
qDry Pro - The Professional Integration of Infrared and Hot Air Dryers
|
| C7.02 |
Johannes Kritzinger, Graz University of Technology
|
|
Quantification of the Penetration of Coating Pigments Into the Base Paper Determined by Automated Serial Sectioning
(Presentation)
|
| P28.03 |
William S. Butterfield, Stowe Woodward/Mount Hope
|
|
Recent Advances in Rubber Roll Covers for Improved Paper Machine Performance and Reduced Energy Requirements
(Presentation)
|
| P15.01 |
Jerry L. Aue, Aue Energy Consulting / a Focus on Energy provider
|
|
Redesigning Repulping Operations - A Success Story
(Presentation)
|
| P13.02 |
Daniel Waetzig, BTG Americas Inc.
|
|
Reducing Energy Costs through Closed Loop Refiner Control
|
| P21.04 |
R. Daniel Haynes, EKA Chemicals Inc.
|
|
Removing the Unknown of Lap Pulp Colloidal Stickies to Improve Paper Machine Runnability
(Presentation)
|
| P21.01 |
David Kelso, DuBois Chemicals
|
|
Rethinking Press Fabric Cleaning To Be Lean & Green
(Presentation)
|
| P26.02 |
Linda Robertson, International Microbial Associates Inc.
|
|
Review of TAPPI - Monograph on Microbiology of Papermaking Systems
|
| NTSI.03 |
Kevin Erickson, The Way, Incorporated
|
|
Safe Acid Cleaning Technology Advances
|
| P4.00 |
Tom Rodencal, Nalco Company
|
|
Session Summary
|
| P12.00 |
Paula McKnight, U.S. Gypsum
|
|
Session Summary
|
|
Philip Wells, Wells Enterprises Inc. (University of WA 1978)
|
|
Session Summary
|
| P23.00 |
|
Session Summary
|
| P15.05 |
Valter Canelli, PMT Italia
|
|
Smarnip - Shoe Press Evolution to Improve the Paper Quality
|
| P11.01 |
Soile Kilpi, Principal, Poyry Management Consulting USA, Inc
|
|
State of the Tissue Industry – 2011 and Onwards
|
| P15.04 |
|
Stora Enso, Anjala PM 2 - Major Speed Increase with Dryer Section Runnability Improvements
|
| P9.03 |
Hanna Lindqvist, Abo Akademi
|
|
The Effect of Fines on Wet and Dry Web Properties
(Presentation)
|
| P24.03 |
|
The Effect of Press Felt Non-uniformity on Sheet Smoothness and Dewatering
|
| P9.01 |
Kristian Erik Salminen, VTT Technical Research Centre of Finland
|
|
The Effects of Certain Polymers on Tensile Strength and Tension Relaxation of Wet Web
(Presentation)
|
| P16.01 |
Mark D. Crable, Greenville Colorants
|
|
The Evolution of Tinting Dyes in White Papers
(Presentation)
|
| C8.01 |
Don Hoesl, Martin Cohen, Michelman, Inc
|
|
The Future of Barrier Coatings
(Presentation)
|
| P9.04 |
Frank J. Sutman, Ashland Hercules Water Technologies
|
|
The Influence of Filler Content and Process Additives on Wet Web Strength and Runnability
(Presentation)
|
| C7.01 |
Roger Bollstrom, Abo Akademi University
|
|
Top Layer Coatability on Barrier Coatings
(Presentation)
|
| 2 |
Roger Bollstrom, Abo Akademi University
|
|
Towards Paper Electronics - A Multilayer Coated Fiber-Based Substrate Suitable For Printed Functionality
|
| 6 |
Ana Lourenço, Chemical Engineering Department
|
|
Two-Layer Coated Papers Using Precipitated Calcium Carbonate
|
| C6.03 |
Jeffrey White, Irl Duling, John J. Riccardi, Advanced Photonix; Jason Morgan, Mike Friese, Appleton
|
|
Use of a Pulsed Terahertz Sensor for Coat Weight, Noncontact Caliper Thickness and Moisture Measurement
(Presentation)
|
| P9.02 |
|
Wet-Web Strength and Pressability of Highly-Filled Sheets
(Presentation)
|
| C9.01 |
|
What Does Interfacial Chemistry Have to Do with Missing Dots and Poor Ink Acceptance?
(Presentation)
|
| P23.03 |
Linda Robertson, International Microbial Associates
|
|
Why Isn't My Program Working? Exploring Microbial Resistance at the Wet End
(Presentation)
|
