Inventory audit notice: TAPPI Press orders will not be processed from August 21–28 during our fiscal year-end inventory audit. Orders placed during this time will ship starting August 31, in the order received. Normal payment processing also resumes August 31.

Thanks for your patience — this helps us serve our members better.

Search

Use the search bar or filters below to find any TAPPI product or publication.

Showing 1,021–1,030 of 1,758 results (Duration : 0.008 seconds)
Journal articles
Open Access
Pre-damping effects on water absorption and drying dynamics in flexographic printing, TAPPI Journal November 2025

ABSTRACT: Optimizing flexographic printability can involve the ink and the substrate, as well as the printing process. It has been widely reported in the literature that controlling topography of the substrate and its porosity are vital for good flexographic printability, especially when using water-based inks. This study focuses on how pre-damping a surface impacts liquid absorption and improves wet trapping (ink on ink with no intermediate drying) in flexographic printing. A Prüfbau universal print tester was adapted to analyze flexographic wet-on-wet ink printing and trapping using yellow and magenta inks for contrast. Slow drying of the first ink layer (yellow) leads to mottle when the second layer (magenta) is applied. The study explores the “wet sponge” hypothesis: a pre-damped surface should absorb liquid faster. The Lucas- Washburn equation describes long-term absorption, but it does not capture short-term uptake, which instead follows a linear dependence on time.

Journal articles
Open Access
Water and grease resistance of paperboard coated with long chain cellulose fatty acid esters using electrostatic powder coating, TAPPI Journal April 2026

ABSTRACT: Fiber-based materials used for foodservice, takeaway, and other packaging applications must typically provide water and grease resistance. Simultaneously, there is growing interest towards bio-based and renewable barrier coatings. In this study we applied thermoplastic long chain fatty acid cellulose esters onto paperboard using electrostatic powder coating to create barrier properties of interest. Electrostatic powder coating provides a water-free process to tackle moisture-induced quality issues and to provide an even coating layer. Cellulose octanoate and palmitate esters were produced in pilot scale. These were ground into fine particles using liquid nitrogen and applied onto paperboard sheets using an electrostatic powder gun. The loosely packed coatings were fixed and fused onto the paperboard by hot pressing. We characterized the coated sheets for coating thickness, contact angles with water, water absorption, grease resistance (KIT), and olive oil barrier. Two commercial polyethylene powders were used as references. Our results indicated that the long chain cellulose fatty acid ester coatings were thermoplastic and hydrophobic with contact angles above 100°. Water absorption was similar to the reference coatings. While grease resistance was lower than with the references, the cellulose ester coatings slowed down diffusion of olive oil through the paperboard. Cellulose octanoate ester with a lower melt viscosity already provided smooth coatings after the initial hot pressing step, while in most cases, the second post hot pressing step further improved the barrier properties.

Journal articles
Open Access
Nonlinear modeling of batch digester discharge dynamics with rheology-driven hydraulic transport and drainability coupling, TAPPI Journal September 2026

ABSTRACT: Batch digester blowdown constitutes a strongly nonlinear transient transport process governed by the coupled evolution of pulp consistency, slurry density, hydraulic resistance, liquid inventory, and discharge line dynamics. A control-oriented nonlinear formulation is developed by coupling dry fiber and free liquor mass balances with phase volume reconstruction, consistency-dependent hydraulic resistance, channeling and drainability effects, and a power law head flow relationship derived within a lumped hydraulic inertance framework. A fixed-gain PI controller obtained from local linearization is employed as the conventional benchmark, whereas an integral sliding mode controller (SMC) explicitly compensates the nonlinear time-varying hydraulic structure and bounded disturbances. Both strategies are evaluated under identical actuator constraints and sequential perturbations involving opposing head, hydraulic resistance, channeling, drainability, and dilution. Numerical results demonstrate lower rootmean- square error, integral absolute error, and peak flow-tracking error for the SMC, with rapid recovery toward the prescribed sliding boundary layer and improved robustness to variations in the nonlinear flow exponent n. Cumulative electrical energy and batch-specific specific energy consumption remain comparatively similar, indicating that the principal SMC benefit is enhanced hydraulic regulation rather than substantial batch energy reduction. Specific energy consumption is an established metric for energetic assessment of slurry transport. Model-based hydraulic demand, electrical power, and sliding manifold surfaces further characterize the nonlinear operating domain. The resulting framework provides a computational proof-of-concept for modeling and control of transient batch digester discharge systems.

Journal articles
Open Access
Analysis of wrinkle formation and propagation during paperboard deep drawing, TAPPI Journal October 2026

ABSTRACT: Paper-based packaging is becoming increasingly important as a sustainable alternative to plastics. Among forming processes, deep drawing is particularly promising due to its high cost-effectiveness, short processing times, and suitability for large-scale production. A major challenge, however, lies in the formation of wrinkles, which impair the visual quality, functional performance, and dimensional stability of the packaging, thereby affecting subsequent processes such as filling, printing, and sealing. This study focuses on analyzing the occurrence and propagation of wrinkles during the deep drawing of paperbased materials to derive fundamental insights and strategies for prevention. The wrinkles arise from tangential compressive stresses in the flange and the material’s limited thickening, leading to local stability failures once a critical stress threshold is exceeded. A combined approach of experimental investigations, numerical simulations, and analytical considerations was used to examine a rotationally symmetrical part. A transparent die enabled spatial observation of wrinkle initiation and growth. First, wrinkles were found to typically initiate in the cross direction (CD), while most wrinkles develop in the machine direction (MD). By comparing analytically and numerically determined stress distributions, the mechanisms of wrinkle formation can be understood both locally and temporally, thereby enabling the prediction of wrinkle occurrence.

Journal articles
Open Access
Aqueous polymer dispersions from long chain cellulose fatty acid ester for coating of paperboard, TAPPI Journal October 2026

ABSTRACT: Fiber-based substrates are coated with aqueous polymer dispersions to obtain the necessary barrier properties for, e.g., food service, takeaway, and other packaging applications. There is interest to replace non-renewable substances driven by the concerns over the price stability and depletion of fossil resources, environmental and safety issues, and legislative actions. In this study, we demonstrated that stable aqueous polymer dispersions with solids content of at least 35% can be prepared from a long chain cellulose fatty acid ester (cellulose octanoate) using both solvent-based and thermomechanical processes. In the solvent-based process, water and additives were mixed with a polymer dissolved in chloroform followed by solvent removal. In the thermomechanical method, water and stabilizers were added into polymer melt under mixing in a pressurized reactor. Dispersions were tested as coatings on paperboard and assessed for their grease resistance and water and oil barrier. Oil barrier was clearly improved with most of the dispersions. In addition, proper film formation was necessary for achieving improved water barrier. However, the stabilizing system had a clear impact on the dispersion stability and the water barrier performance of these coatings.

Journal articles
Open Access
Dynamic modeling, efficiency analysis, and hierarchical control of industrial airborne pulp dryers, TAPPI Journal October 2026

ABSTRACT: Industrial airborne pulp drying is governed by strongly coupled moisture transport, heat transfer, psychrometric behavior, airflow distribution, pressure dynamics, and fan operation. A nonlinear multi-zone dynamic model was formulated to represent these interactions through coupled mass and energy balances, pressure-driven deck-to-deck airflow, centrifugal-fan dynamics, and through-thickness moisture and temperature transport. Overall and thermal efficiencies, specific energy consumption, and specific moisture evaporation ratio (SMER) were incorporated for energetic assessment. A hierarchical direct synthesis methodology (DSM), comprising moisture•temperature and airflow•fan speed cascade loops with chamber-pressure regulation, was evaluated against proportionalintegral- derivative (PID) control and model predictive control (MPC) benchmarks. The MATLAB simulations of a six-zone dryer predicted progressive moisture reduction toward 0.120 kg H2O/kg dry pulp, overall efficiency near 0.60, thermal efficiency near 0.61, and SMER of approximately 0.95-0.96 kg H2O/kWh. The DSM provided the lowest accumulated moisture-tracking error and smooth control action, while PID control gave comparable fast loop regulation. The current MPC implementation exhibited poorer moisture•thermal tracking, indicating the need for further predictive model refinement and systematic tuning. The formulation provides a controloriented basis for subsequent parameter identification and industrial validation.

Journal articles
Open Access
Editorial: Innovation in Paper Science and Engineering at the University of Wisconsin•Stevens Point, TAPPI Journal October 2026

This is the first in a series of editorial profiles featuring the academic and research portfolios of Forest Products Universities focusing on pulp and paper science and engineering, biorefinery, bioproducts, and other industry-related topics. These profiles include information about faculty, facilities, student success, and future plans. • Arthur J. Ragauskas, Editor-in-Chief, TAPPI Journal

Journal articles
Open Access
Pressure drop characteristics of steam condensation flow in triangular channels for multi-channel cylinder dryers, TAPPI Journal September 2026

ABSTRACT: This study investigates the condensation pressure drop characteristics of steam in the channels of multi-channel drying cylinders, which remain insufficiently understood. An experimental system was established using a horizontal mini-channel with a triangular cross-section and a hydraulic diameter of 4.09 mm. Flow visualization combined with a high-precision data acquisition system was employed to systematically examine the effects of steam mass flux (10•60 kg/(m²·s)), inlet temperature (110°C•140°C), and cooling water flow rate (100•500 kg/h) on the frictional pressure drop during condensation. The results indicate that the two-phase frictional pressure drop increases with rising steam mass flux but decreases with increasing saturation temperature, while the effect of cooling water flow rate becomes more pronounced under lower temperature conditions. In addition, several existing two-phase flow pressure drop correlations were evaluated against the experimental data. Based on a comparative assessment of eight existing correlations, a new predictive model was developed through regression analysis, achieving a mean absolute percentage error (MAPE) of 19.56%. These findings elucidate the pressure drop mechanism of steam condensation in triangular channels and establish a high-precision predictive model, providing theoretical guidance and a critical tool for the engineering design and energy consumption optimization of multi-channel drying cylinders.

Journal articles
Open Access
Guest Editorial: Carrying forward the tradition of fundamental research, TAPPI Journal June 2026

Since its first symposium in 1957, the Fundamental Research Symposium has evolved around fundamental research themes aimed at scientifically understanding papermaking. The symposium is organized by the Fundamental Research Committee (FRC), which is operated by the Fundamental Research Society (FRS). The unique format of the symposium, held at universities such as Oxford and Cambridge where participants stay together, fosters intensive academic exchange and collegial interaction.

Journal articles
Open Access
Optimization of optical coverage of board surfaces with assessment of light scattering and absorption using mineral as a coating component, TAPPI Journal June 2026

ABSTRACT: One of the primary functions of mineral inclusion into paper or paperboard is to improve the optical performance of the substrate. A coating may be applied to a sheet in order to cover a dark base, to improve the sheet opacity, to give the correct smoothness and gloss, or to give a suitable surface on which to print. The brightness of a pigment has long been used as a guide for pigment choice in paper and board. However, the measured paper brightness is a function of color and light absorption (K) of the coating and base and the light scattering (S) within the sheet resulting from interfaces with different refractive index. The optical performance can be quantified by measuring the S&K coefficients as described by the Kubelka-Munk model/theory in a filled or coated paper sheet. In coating, this is often assessed as a function of coat weight, and the corresponding physical sheet properties are assessed at the same time; for example, the correct gloss, smoothness, point-to-point uniformity, and printability. The optical performance in the sheet is often not directly related to the pigment brightness, but is largely a function of the particle packing within the sheet and coating layer. In the first and second main sections of this work, respectively, we show how S&K calculations from the Kubelka- Munk equations can be used in coated sheets to determine the optical performance and how this can be used as a predictive tool for the final sheet performance. This is presented for base sheets with different starting brightness. The third section of this work focuses on how mineral combinations in coatings can be used to improve the light scattering and consequently the optical performance of the board. We include theoretical considerations and then finally share a case study for improvement on the optical properties of recycled board.