Search
Use the search bar or filters below to find any TAPPI product or publication.
Filters
Content Type
Publications
Level of Knowledge
Committees
Collections
Journal articles
Effects of variability of wood chip composition on recovery cycle operation, TAPPI Journal January 2026
ABSTRACT: Fluctuations in wood chip properties in kraft pulp mills, which often follow seasonal patterns, can lead to changes or disruptions in the operation of the recovery cycle whereby the root causes are not immediately obvious. In some cases, these changes are attributed to operational adjustments in the digester or brownstock washing areas resulting from the variability in wood characteristics. Varying wood chip characteristics that have the most significant impact on the recovery cycle operation include the content of non-process elements (NPEs), extractives, and properties influenced by chip storage conditions. Elevated levels of NPEs, often associated with a higher influx of wood bark into the digester, can negatively affect the entire recovery cycle. Increased levels of chlorine and potassium can lead to severe fouling and corrosion in the recovery boiler. Higher concentrations of silicon, aluminum, phosphorus, magnesium and calcium in the chips may accelerate scaling in the evaporation plant, impair dregs and lime mud settling and filtering, reduce lime mud solids content and lime availability, and increase the amounts of dregs, grits, and purged lime mud. This technical review provides an overview of the most significant effects that changes in wood chip quality can potentially exert on various processes within the kraft recovery cycle.
Journal articles
Black liquor spray properties in-furnace conditions for swirl cone nozzles, TAPPI Journal July 2026
ABSTRACT: Recovery boiler furnace operation is controlled for high chemical recovery, high steam production, and low emissions. Good control allows long runs with minimum cleaning without expensive shutdowns. An essential variable affecting boiler operation is black liquor spraying into the furnace. Poorly controlled black liquor spraying causes difficulties, e.g., in chemical recovery, fouling of heat transfer surfaces, and decreased energy production. A challenging measurement strategy with three different swirl cone nozzles . types A, C, and T . was carried out at a mill in the United States. Black liquor spray properties were measured under in-furnace conditions for flow rates of 2.0 L/s to 3.0 L/s. Three spraying temperatures of 119™‹C, 122™‹C, and 126™‹C, which were 2™‹C, 5™‹C, and 9™‹C above the boiling point (ƒ¢Te), were tested. These flow rates and temperatures are typical for industrial nozzle sizes with exit orifice sizes of 17 mm and 22 mm. An imaging method to measure droplet size in a highly challenging furnace environment was developed. Droplet volume median diameter (Dv50) for nozzles A, C, and T varied between 7 mm to 4 mm, 7 mm to 5 mm, and 8 mm to 6 mm, depending on the flow rate and temperature. The high number of droplets detected by the analysis program enabled data fitting into statistical correlations. The size and width parameters for the Rosin™]Rammer droplet size distribution function could be defined. The droplet size distribution was found to be surprisingly wide, probably because of swollen droplets. Spray velocity was measured in two locations, 5 cm from the nozzle and 1.8 m from the nozzle. Near the nozzle, the average velocity increased from 7.3 m/s to 13 m/s when the flow rate was increased from 2 L/s to 3 L/s. Increase of black liquor temperature increased spray velocity in most of the cases. At the distance of 1.8 m from the nozzle, average spray velocities varied between 4.0 m/s to 11 m/s, depending on nozzle geometry, flow rate, and temperature. The opening angles of the spray for nozzles A and C varied between 57™‹ to 78™‹. The opening angle of nozzle T with flow guide varied between 48™‹ to 56™‹. The highest penetration of the spray was estimated for nozzle T because of the narrow spray and large droplets.
Journal articles
Image classification of the furnace bed height in recovery boilers, TAPPI Journal July 2026
ABSTRACT: The goal of this study is to develop an approach for classifying char bed height in a recovery boiler during operation. The resulting classified images form a dataset that can be used by the mill to support operational improvements. The study integrates data from the digester, evaporation plant, recovery boiler, and recausticizing plant, along with the classified image data. A convolutional neural network (CNN) was trained on bed camera images that were manually annotated to classify furnace bed height. The model was then used to generate a binary bedheight parameter over a 16-month period, and an extreme gradient boosting (XGBoost) model was applied to identify relationships with operating parameters across the recovery cycle. The outcomes of this research may offer deeper insights into the processes underlying bed dynamics. Ultimately, the developed system may serve as a tool for optimizing bed conditions and supporting stable combustion.
Journal articles
Guest Editorial: Carrying forward the tradition of fundamental research, TAPPI Journal June 2026
Since its first symposium in 1957, the Fundamental Research Symposium has evolved around fundamental research themes aimed at scientifically understanding papermaking. The symposium is organized by the Fundamental Research Committee (FRC), which is operated by the Fundamental Research Society (FRS). The unique format of the symposium, held at universities such as Oxford and Cambridge where participants stay together, fosters intensive academic exchange and collegial interaction.
Journal articles
Catalyzed interstage sulfonation CTMP process of aspen wood, TAPPI JOURNAL, June 2002, Vol. 1(4) (95KB)
Catalyzed interstage sulfonation CTMP process of aspen wood, TAPPI JOURNAL, June 2002, Vol. 1(4) (95KB)
Journal articles
Determination of Hexenuronic Acid and Residual Lignin in Pulps by UV Spectroscopy in Cadoxen Solutions, JOURNAL OF PULP AND PAPER SCIENCE: VOL. 28 NO. 6 JUNE 2002 [02JUNJP189.pdf]
Determination of hexenuronic acid and residual lignin in pulps by uv-spectroscopy in cadoxen solutions, Journal of Pulp and Paper Science, June 2002, Vol. 28(6) (188KB)
Journal articles
Are your thermowells safe?, TAPPI JOURNAL, April 2002 (270KB), (TAPPI JOURNAL APRIL 2002)
Are your thermowells safe?, SOLUTIONS! & TAPPI JOURNAL, April 2002 (270KB)
Journal articles
Formation of sulfur-rich melt near the floor tubing of kraft recovery boilers, TAPPI JOURNAL, April 2002, Vol. 1(2) (192KB)
Formation of sulfur-rich melt near the floor tubing of kraft recovery boilers, TAPPI JOURNAL, April 2002, Vol. 1(2) (192KB)
Journal articles
Thermal Yellowing of Hardwood Kraft Pulp Bleached with a Chlorine Dioxide Based Sequence, JOURNAL OF PULP AND PAPER SCIENCE: VOL. 28 NO. 4 APRIL 2002 [02APRJP115.pdf]
Thermal yellowing of hardwood kraft pulp bleached with a chlorine dioxide based sequence, Journal of Pulp and Paper Science, April 2001, Vol. 28(4) (111KB)
Journal articles
TJ web enhancements, TAPPI JOURNAL, August 2002, Vol. 1(6) (
TJ web enhancements, TAPPI JOURNAL, August 2002, Vol. 1(6) (49KB)