Search
Use the search bar or filters below to find any TAPPI product or publication.
Filters
Content Type
Publications
Level of Knowledge
Committees
Event Type
Collections
Tissue Division
The Division consists of hundreds of technical professionals who work in the manufacture and converting of tissue products around the world. The Division's goal is to create a more knowledgeable tissue workforce in all markets through education, exchange of peer-reviewed, noncommercial technical information and networking. New members are always welcome.
Examination of scoring parameters of corrugated fiberboard, TAPPI Journal August 2026
ABSTRACT: One of the less interrogated aspects of corrugated packaging are scoring and scoring profiles, the intentional localized crushing of flutes to accommodate package folding and closure. This study explores the effect of scoring parameters on box compression test strength (BCT) of two balanced corrugated boards. Scoring differences produced BCT that varied by 10% for one board and less for the other board. Parameters from 4-point bending of scored specimens showed some correlation with BCT, while eccentricity and torsion parameters had less correlation. Different scores produced BCT differences that were not strongly predicted by most standard tests in the current study, implying other tests may be needed to examine the actual boundary conditions on a box during compression. In a few cases, aggressive scoring produced cracked score lines, and those containers had lower BCT than containers with uncracked score lines.
Editorial: New research sheds light on critical processes in the recovery cycle, TAPPI Journal July 2026
The chemical recovery cycle has been called the backbone of a kraft pulp mill, making modern paper production both economically and environmentally sustainable. It regenerates pulping chemicals (primarily sodium hydroxide and sodium sulfide) used to separate wood fibers, allowing them to be reused rather than continuously replaced, while also recovering energy by burning the organic components of black liquor to produce steam and electricity that supply much of the mill’s power needs. In addition, the recovery cycle minimizes waste, reduces emissions, and recovers valuable by-products, creating a highly efficient closedloop system. Without this process, chemical costs, energy consumption, and environmental impacts would increase, making large-scale kraft pulping significantly less economical and sustainable.
Prediction of residual calcium carbonate (CaCO3) in the lime kiln of a kraft pulp mill
ABSTRACT: In a kraft pulp mill, the rotary lime kiln is responsible for converting calcium carbonate (CaCO3) into calcium oxide (CaO) to be reused in the causticizing plant. An important parameter of the calcination efficiency and the product quality is the amount of CaCO3 not converted to CaO, commonly defined as residual carbonate. This parameter is usually determined through laboratory analysis, which introduces delays in process control and limits the ability to make timely operational adjustments.
Journal articles
Corrugated medium strength assessments in different flute structures, TAPPI Journal April 2026
ABSTRACT: Recent advancements in our ability to evaluate papers and our understanding of the mechanics of box failure have brought a renewed focus on measuring the performance of corrugated medium and an associated evolution of paper measurement approaches. This study evaluates the load curves, Hardness (where the fluted structure’s loading shifts away from an elastic response), and Concora medium crush test (CMT) values for a range of corrugated mediums in different common flute geometries. The shape of the load curve is a function of the geometry of the fluting profile and the relative stiffness of the paper, with smaller flutes and heavier papers reaching both the Hardness value and the ultimate load at lower deformation. Nonetheless, while the specific dynamics during the loading process vary, Hardness and CMT values correlate linearly between flute structures, even when testing specimens after different equilibration periods post-fluting. These correlations confirm the applicability of the standard A-flute CMT test to a broad range of papers and potential combined board flute structures, supporting quality assurance processes for medium production and optimization in corrugated board manufacturing.
Journal articles
Influence of base sheet properties on barrier coating performance, TAPPI Journal November 2025
ABSTRACT: Paper packaging offers a sustainable alternative to standard plastic-based materials, particularly for food and beverage applications. With reduced fiber treatment options like fluorochemicals, uncoated base stock often provides little-to-no effective barrier against liquid water, oil/grease, or moisture transmission. Despite the lack of natural barrier performance, base sheet properties can significantly influence the efficiency of applied waterbased barrier coatings. In this study, various base stock properties, such as caliper, porosity, roughness, and ash content, are reported to influence the barrier performance of styrene-acrylic and a copolymer of styrene-butadiene/styrene-acrylate based barrier coatings. These findings will help paper and board producers design better, more cost-effective, purposebuilt substrates for barrier applications in the packaging industry.
Journal articles
A laboratory-scale automated vacuum-assisted device for coating of cellulose nanofibrils onto paper, TAPPI Journal November 2025
ABSTRACT: An automated vacuum-assisted coating system was developed to deposit cellulose nanofibril (CNF) layers onto paper substrates, simulating potential industrial geometries while allowing precise control of web speed (10•20 m/min), vacuum time (up to 30 s), and applicator gap (0.5•0.9 mm). Vacuum assistance makes it possible to obtain coat weights over 5 g/m2 in a single pass and increases solids after coating from less than 10% to over 28%• 30%, reducing drying demand by more than 60%. Coat weights were tuned from 6 to over 11 g/m² by varying suspension solids (0.4•0.6 wt%), line speed, and filtration length (20•40 mm), with strong agreement between experimental data and model predictions. Barrier testing showed Kit test values for double folded samples of 9•12 and Gurley air resistances above 4 × 104 s once coat weights exceeded 7 g/m². Comparable performance was achieved with lower fines content CNF (60%) by increasing coat weight, providing technical flexibility and cost advantages for industrial scale-up.
Effects of salinity (Na2SO4) on performance of papermaking additives for fine-particle retention, dewatering, and flocculation, TAPPI Journal October 2025
Application: The experimental results help to provide assurance that certain conventional papermaking additives may continue to perform well, even at electrical conductivity levels near to those associated with paper mills that recycle water so intensively that they have zero liquid effluent.
Journal articles
On the design of corrugated boards: A new FEM modeling and experimental validation, TAPPI Journal August 2025
ABSTRACT: This study presents a simplified finite element modeling (FEM) approach suitable for large structures made of corrugated boards, such as customized packages, based on a homogenization method, which is combined with correction factors for internal mechanisms. The homogenization process reduces computational time by transforming flute geometries into equivalent elastic models. In large deformations and in the presence of contact for a given geometry, the effective elastic modulus in the thickness direction, as well as the effective thickness of the structure, are corrected by two statistical Weibull distributions representing the contact and buckling mechanisms in a corrugated board. The Weibull parameters are obtained via experimental analysis, and such a process is then validated. The results demonstrate that the statistical parameters (â1 = 0.14, â2 = 1.31) can be used for the simplistic representation of corrugated boards, being computationally efficient. This research contributes to the optimization of corrugated packaging design, specifically by simplifying FEM models for faster, yet equally accurate, simulations.
Journal articles
Editorial: Investing in Amercian advanced manufacturing, TAPPI Journal June 2025
ABSTRACT: American manufacturing is seeing a renewal, which is needed to boost jobs in America, particularly in the middle and manufacturing base of the country. The ongoing tariff situation emphasizes the importance of protecting domestic manufacturing. There is U.S. congressional agreement, in principle, to bring back manufacturing to the United States. However, given how the global trade and manufacturing space has shifted in the last four decades, it may not be a comparative advantage to manufacture low margin and labor-intensive products. Officials in the current U.S. Administration have stated that manufacturing of socks and T-shirts is not necessarily in the interest of the United States, but focusing on value-added products is essential. While silicon chips, solar panels, and batteries are key items of interest, advanced textile materials such as those that find applications in industrial products and composites, products that can save human lives, and products for protecting the environment are highly-valued items that cater to national security.