Search

Research on flame-retardant paper prepared by the method of in-pulp addition of ammonium polyphosphate, TAPPI Journal May 2023

ABSTRACT: At present, the production of flame-retardant paper usually uses the impregnation method of phosphorus-nitrogen flame retardants in paper. There are few reports on the application of an in-pulp addition method. In this paper, the solubility of ammonium polyphosphate (APP) and its effect on flame-retardant paper were investigated for use in an in-pulp addition method. It was found that APP particles were square, with an average particle size of 21.88 µm. The particle size decreased significantly after immersion in water at 25°C for 24 h. Furthermore, most of the APPs were dissolved after immersion in water at 90°C for 0.5 h, and the residuals agglomerated and their shape turned into an amorphous form. The APP possessed strong electronegativity and could partially ionize in water. The solubility of APP was 0.18 g/100 mL water at 25°C and increased quickly when the temperature was higher than 30°C. Therefore, APP should be added to the pulp at temperatures below 30°C. The tensile strength of the paper initially increased with the addition of APP, and it reached the maximum value when the APP content was 10% and then gradually decreased. The limiting oxygen index (LOI) value of the paper was 28.7% when the added amount of APP was 30% and cationic polyacrylamide (CPAM) was 0.08%, reaching the flame-retardant level.

Over the Wire, Paper360º May/June 2023

Paper Mill Saves 30 Percent on Maintenance with LTSA, Paper360º May/June 2023

TAPPI Journal Summaries, Paper360º May/June 2023

TAPPI Journal Summaries, Paper360º May/June 2023

Nonlinear modeling of batch digester discharge dynamics with rheology-driven hydraulic transport and drainability coupling, TAPPI Journal September 2026

ABSTRACT: Batch digester blowdown constitutes a strongly nonlinear transient transport process governed by the coupled evolution of pulp consistency, slurry density, hydraulic resistance, liquid inventory, and discharge line dynamics. A control-oriented nonlinear formulation is developed by coupling dry fiber and free liquor mass balances with phase volume reconstruction, consistency-dependent hydraulic resistance, channeling and drainability effects, and a power law head flow relationship derived within a lumped hydraulic inertance framework. A fixed-gain PI controller obtained from local linearization is employed as the conventional benchmark, whereas an integral sliding mode controller (SMC) explicitly compensates the nonlinear time-varying hydraulic structure and bounded disturbances. Both strategies are evaluated under identical actuator constraints and sequential perturbations involving opposing head, hydraulic resistance, channeling, drainability, and dilution. Numerical results demonstrate lower rootmean- square error, integral absolute error, and peak flow-tracking error for the SMC, with rapid recovery toward the prescribed sliding boundary layer and improved robustness to variations in the nonlinear flow exponent n. Cumulative electrical energy and batch-specific specific energy consumption remain comparatively similar, indicating that the principal SMC benefit is enhanced hydraulic regulation rather than substantial batch energy reduction. Specific energy consumption is an established metric for energetic assessment of slurry transport. Model-based hydraulic demand, electrical power, and sliding manifold surfaces further characterize the nonlinear operating domain. The resulting framework provides a computational proof-of-concept for modeling and control of transient batch digester discharge systems.

Pressure drop characteristics of steam condensation flow in triangular channels for multi-channel cylinder dryers, TAPPI Journal September 2026

ABSTRACT: This study investigates the condensation pressure drop characteristics of steam in the channels of multi-channel drying cylinders, which remain insufficiently understood. An experimental system was established using a horizontal mini-channel with a triangular cross-section and a hydraulic diameter of 4.09 mm. Flow visualization combined with a high-precision data acquisition system was employed to systematically examine the effects of steam mass flux (10•60 kg/(m²·s)), inlet temperature (110°C•140°C), and cooling water flow rate (100•500 kg/h) on the frictional pressure drop during condensation. The results indicate that the two-phase frictional pressure drop increases with rising steam mass flux but decreases with increasing saturation temperature, while the effect of cooling water flow rate becomes more pronounced under lower temperature conditions. In addition, several existing two-phase flow pressure drop correlations were evaluated against the experimental data. Based on a comparative assessment of eight existing correlations, a new predictive model was developed through regression analysis, achieving a mean absolute percentage error (MAPE) of 19.56%. These findings elucidate the pressure drop mechanism of steam condensation in triangular channels and establish a high-precision predictive model, providing theoretical guidance and a critical tool for the engineering design and energy consumption optimization of multi-channel drying cylinders.

The European Industry: Plenty of Challenges and Opportunities, Paper360º March/April 2020

The European Industry: Plenty of Challenges and Opportunities, Paper360º March/April 2020

Paptic: Paper Products to Help Save the World, Paper360º March/April 2020

Paptic: Paper Products to Help Save the World, Paper360º March/April 2020

Quick Evaluation of Fillers and Fines in Paper and Board, Paper360º March/April 2020

Quick Evaluation of Fillers and Fines in Paper and Board, Paper360º March/April 2020

Preventive Maintenance Cards, Anyone?, Paper360º March/April 2020

Preventive Maintenance Cards, Anyone?, Paper360º March/April 2020