Search

Flippr° â?? an industrial research project in Austria, TAPPI JOURNAL 2015 March - 15MAR209

Flippr° â?? an industrial research project in Austria, TAPPI JOURNAL 2015 March - 15MAR209

Ultimate Effluent Treatment Allows for Ever-larger Pulp Mill Capacities, Paper360° March/April 2015

Ultimate Effluent Treatment Allows for Ever-larger Pulp Mill Capacities, Paper360º March/April 2015

Quantification of lignin-carbohydrate complexes in hardwood pulps, Part 2: Effects of bleaching chemicals, TAPPI JOURNAL October 2015

Quantification of lignin-carbohydrate complexes in hardwood pulps, Part 2: Effects of bleaching chemicals, TAPPI JOURNAL October 2015

Wheat straw as an alternative pulp fiber, TAPPI Journal January 2020

Author: Peter W. Hart | ABSTRACT: The desire to market sustainable packaging materials has led to an interest in the use of various fiber types as a raw material. It has been suggested that the use of annual crops for partial replacement of wood fiber would result in more sustainable products. Several life cycle analyses (LCA) have been performed to evaluate these claims. These LCAs provided conflicting and contradictory results because of the local conditions and the specific pulping processes investigated. Selected LCAs are reviewed and the underlying reasons for these conflicting results are analyzed.

We’ve Got Good Chemistry: Innovations Papermakers Need to Know About, Paper360º March/April 2020

We’ve Got Good Chemistry: Innovations Papermakers Need to Know About, Paper360º March/April 2020

Investigation of the influencing factors in odor emission from wet-end white water, TAPPI Journal October 2020

ABSTRACT: Emission of malodorous gases, such as volatile organic compounds (VOCs), hydrogen sulfide (H2S), and ammonia (NH3) during pulping and papermaking has caused certain harm to the air environment and human health. This paper investigated the influencing factors of odor emission from wet-end white water during the production of bobbin paper in a papermaking mill using old corrugated containers (OCC) as raw material. The concentration of malodorous gases emitted from wet-end white water was determined with pump-suction gas detectors. The results indicated that low temperature could limit the release of malodorous gases from white water. Specifically, no total volatile organic compounds (TVOC), H2S, and NH3 was detected at a temperature of 15°C. The concentrations of malodorous gases were slightly increased when temperature increased to 25°C. When temperature was 55°C, the released concentrations of TVOC, H2S, and NH3 were 22.3 mg/m3, 5.91 mg/m3, and 2.78 mg/m3, respectively. Therefore, the content of malodorous gases significantly increased with the temperature increase. The stirring of white water accelerated the release of malodorous gases, and the release rate sped up as the stirring speed increased. However, the total amount of malodorous gases released were basically the same as the static state. Furthermore, the higher the concentration of white water, the greater the amount of malodorous gases released. The pH had little influence on the TVOC release, whereas it significantly affected the release of H2S and NH3. With the increase of pH value, the released amount of H2S and NH3 gradually decreased. When pH reached 9.0, the release amount of H2S and NH3 was almost zero, proving that an alkaline condition inhibits the release of H2S and NH3.

A new and quick testing method for evaluating commercial OCC recycled pulp, TAPPI Journal July 2024

ABSTRACT: In this paper, a new and quick testing method for evaluating commercial old corrugated cardboard/containers (OCC) pulp was developed and used by a large Chinese boxboard manufacturer for quality control of imported OCC pulp.

Effect of high sulfate content on viscosity of recovery boiler molten smelt, TAPPI Journal March 2024

ABSTRACT: A systematic study was conducted to examine the effect of high sulfate content on the freezing temperature of molten smelt and how this may contribute to the formation of viscous jellyroll smelt in recovery boilers. The results show that even for recovery boilers with a smelt reduction as low as 70%, the sulfate content in smelt has no or little effect on smelt freezing temperature, and hence, on molten smelt fluidity. The perceived adverse effect of high sulfate content on smelt fluidity and on jellyroll smelt formation comes from the high sulfate content in deposits that have fallen from the upper furnace. Fallen deposits may or may not form jellyroll smelt, depending on whether or not they can melt and be well-mixed with molten smelt by the time they reach the smelt spouts. It is not the high sulfate content in smelt resulting from the low smelt reduction efficiency that makes molten smelt viscous and forms jellyroll smelt, but rather, it is the incomplete melting of fallen deposits that results in one of the proposed mechanisms for jellyroll smelt formation.

Summaries from TAPPI Journal, Paper360º May/June 2024

Amine boranes as new reductive bleaching chemicals on softwood pulp single stage and multistage processes, TAPPI JOURNAL, February 1999, Vol. 82(2)

Amine boranes as new reductive bleaching chemicals on softwood pulp single stage and multistage processes, TAPPI JOURNAL, February 1999, Vol. 82(2)