Search
Use the search bar or filters below to find any TAPPI product or publication.
Filters
Content Type
Publications
Level of Knowledge
Collections
Journal articles
Magazine articles
Non-process elements in the recovery cycle of six Finnish kraft pulp mills, TAPPI Journal March 2023
ABSTRACT: In this work, the aim was to study the distribution and accumulation of the non-process elements (NPEs) in the recovery cycle of Finnish pulp mills and look at whether the geographical location (North vs. South) correlates with the current Finnish NPE levels. In addition, a comparison to older similar Finnish measurements was made with an attempt to analyze the reasons behind differences in the most typical non-process elements, aluminum (Al), silicon (Si), calcium (Ca), phosphorus (P), magnesium (Mg), manganese (Mn), chlorine (Cl), and potassium (K), taking into account the main elements in the white liquor, sodium (Na) and sulfur (S). The extensive laboratory results gained in this study are from seven sampling points at six pulp mills and present analytical data of metal concentrations. The data obtained presents an update to previous NPE studies. The levels found did not statistically differ between North and South Finland. The NPE levels, apart from phosphorus, found in Finnish pulp mills today have not changed considerably compared to the levels in earlier investigations in the 1990s. In the newest data, the phosphorus concentration was consistently higher in the as fired black liquor, electrostatic precipitator (ESP) ash, lime mud, and green liquor than in the previous results. In addition, the levels of Al, Si, Ca, P, and Mg in recovery boiler ESP ash were consistently higher compared to the older results. As the mills start to close their systems more, a stronger accumulation of NPEs can be expected, increasing the likelihood of more operational problems in the process. Further understanding of where the NPEs accumulate and how they can be most effectively removed will be valuable knowledge in the future.
Journal articles
Magazine articles
Paper bending stiffness and web tension measurement from a running web using a vacuum and computer imaging, TAPPI Journal May 2023
ABSTRACT: A novel method for measuring the bending stiffness of paper online during manufacturing is introduced. The method uses photometric stereo imaging to detect the shape of the deflection surface caused by a controllable pressure difference over the paper’s surfaces. The hardware for the measurement is based on a combination of two existing sensors, which has accelerated and facilitated the development of the implementation. The deflection and loads are tied together by the governing differential equation for the bending of an orthotropic elastic plate with selected simplifications. An approach to resolve material parameters and in-plane loads without knowledge of traditional boundary conditions is suggested. The presented method was tested in a paper mill during manufacturing. For bending stiffnesses measured online, correlation coefficients 0.88 and 0.92 were obtained compared to state-of-the-art laboratory measurements. However, the results gained from a moving web are noisy and the data requires correction of the slope and an off-set. Although several issues remain to be resolved before the method can be considered as an accurate measurement for industrial use, the theoretical background, the performance of online implementation, and the results are promising. Possible causes for the observed discrepancies and the future development of the method are discussed.
Journal articles
Magazine articles
Black liquor evaporators upgrade — How many effects?, TAPPI Journal April 2023
ABSTRACT: Black liquor evaporation is generally the most energy intensive unit operation in a pulp and paper manufacturing facility. The black liquor evaporators can represent a third or more of the total mill steam usage, followed by the paper machine and digester. When considering an evaporator rebuild or a new system, the key design question is how many effects to include in the system. The number of effects is the main design feature that deter-mines the economy of the system and the steam usage for a given evaporation capacity. A higher number of effects increases steam economy and reduces energy cost to a point, but additional effects also have higher initial capital cost and increased power costs. This research paper uses life-cycle cost analysis (LCCA) as a method to determine the optimum number of evaporator effects for a new evaporator system. The same basic principles and method can also apply to existing evaporator rebuild projects.
Magazine articles
On management: energy and the pulp and paper industry - how will electric utility deregulation affect You?, TAPPI JOURNAL, March 1998, Vol. 81(3)
On management: energy and the pulp and paper industry - how will electric utility deregulation affect You?, TAPPI JOURNAL, March 1998, Vol. 81(3)
Magazine articles
Quality and environmental management system: electronic documentation management, TAPPI JOURNAL, April 1999, Vol. 82(4)
Quality and environmental management system: electronic documentation management, TAPPI JOURNAL, April 1999, Vol. 82(4)
Magazine articles
Mondi in south africa, TAPPI JOURNAL, April 1999, Vol. 82(4)
Mondi in south africa, TAPPI JOURNAL, April 1999, Vol. 82(4)
Magazine articles
Characterization and evaluation of microbiologically induced corrosion on water heating networks, TAPPI JOURNAL, January 1996, Vol. 79(1)
Characterization and evaluation of microbiologically induced corrosion on water heating networks, TAPPI JOURNAL, January 1996, Vol. 79(1)
Magazine articles
Historic rittenhousetown revisited, TAPPI JOURNAL, June 1996, Vol. 79(6)
Historic rittenhousetown revisited, TAPPI JOURNAL, June 1996, Vol. 79(6)
Magazine articles
Local section development efforts earn distinction for paul magnabosco, TAPPI JOURNAL, March 1996, Vol. 79(3)
Local section development efforts earn distinction for paul magnabosco, TAPPI JOURNAL, March 1996, Vol. 79(3)
Magazine articles
Results of corrosion coupon exposures of ferrous materials in black liquor, TAPPI JOURNAL, November 1996, Vol. 79(11)
Results of corrosion coupon exposures of ferrous materials in black liquor, TAPPI JOURNAL, November 1996, Vol. 79(11)