Search
Use the search bar or filters below to find any TAPPI product or publication.
Filters
Publications
Level of Knowledge
Collections
Journal articles
Magazine articles
Quantification of vegetable oil in recycled paper, TAPPI JOURNAL September 2020
ABSTRACT: Vegetable soybean oil is commonly used in cooking foods that are packaged in takeaway paper-board containers. Vegetable oil is hydrophobic, and in sufficiently high concentration, could interfere with interfiber bonding and result in paper strength loss. In order to quantify the effect of oil on the resulting paperboard strength, it is necessary to quantify the oil content in paper. A lab method was evaluated to determine the soybean oil content in paper. Handsheets were made with pulps previously treated with different proportions of vegetable oil. Pyrolysis gas chromatography-mass spectrometry (pyGCMS) was used to quantify the amount of oil left in the handsheets. The results revealed a strong correlation between the amount of oil applied to the initial pulp and the amount of oil left in the handsheets.In addition, the effect of vegetable oils on paper strength may be affected by the cooking process. Vegetable oil is known to degrade over time in the presence of oxygen, light, and temperature. The vegetable oil was put in an oven to imitate the oil lifecycle during a typical pizza cooking process. The cooked oil was then left at room temperature and not protected from air (oxygen) or from normal daylight. The heated, then cooled, oil was stored over a period of 13 weeks. During this time, samples of the aged oil were tested as part of a time-based degradation study of the cooked and cooled oil.
Journal articles
Magazine articles
Use of Ozone for Cooling Towers. Paper360º July/August 2020
Use of Ozone for Cooling Towers. Paper360º July/August 2020
Journal articles
Magazine articles
We’ve Got Good Chemistry: Innovations Papermakers Need to Know About, Paper360º March/April 2020
We’ve Got Good Chemistry: Innovations Papermakers Need to Know About, Paper360º March/April 2020
Journal articles
Magazine articles
RISI’s European CEO of the Year: Ksenia Sosnina, Ilim Group, Paper360º March/April 2020
RISI’s European CEO of the Year: Ksenia Sosnina, Ilim Group, Paper360º March/April 2020
Journal articles
Magazine articles
BIGGER, BETTER, BOLDER: BillerudKorsnäs Gruvön Surges Forward With Sustainable Paperboard, Paper360º March/April 2020
BIGGER, BETTER, BOLDER: BillerudKorsnäs Gruvön Surges Forward With Sustainable Paperboard, Paper360º March/April 2020
Journal articles
Magazine articles
Papermakers’ Top Issues on Docket for PaperCon 2020, Paper360º March/April 2020
Papermakers’ Top Issues on Docket for PaperCon 2020, Paper360º March/April 2020
Journal articles
Magazine articles
Saica Champblain Beats Mist—But How?, Paper360º March/April 2020
Saica Champblain Beats Mist—But How?, Paper360º March/April 2020
Journal articles
Magazine articles
TAPPI Journal Summaries, Paper360º March/April 2020
TAPPI Journal Summaries, Paper360º March/April 2020
Journal articles
Magazine articles
Fundamental understanding of removal of liquid thin film trapped between fibers in the paper drying process: A microscopic approach, TAPPI Journal May 2020
ABSTRACT: In the fabrication of paper, a slurry with cellulose fibers and other matter is drained, pressed, and dried. The latter step requires considerable energy consumption. In the structure of wet paper, there are two different types of water: free water and bound water. Free water can be removed most effectively. However, removing bound water consumes a large portion of energy during the process. The focus of this paper is on the intermediate stage of the drying process, from free water toward bound water where the remaining free water is present on the surfaces of the fibers in the form of a liquid film. For simplicity, the drying process considered in this study corresponds to pure convective drying through the paper sheet. The physics of removing a thin liquid film trapped between fibers in the paper drying process is explored. The film is assumed to be incompressible, viscous, and subject to evaporation, thermocapillarity, and surface tension. By using a volume of fluid (VOF) model, the effect of the previously mentioned parameters on drying behavior of the thin film is investigated.
Journal articles
Magazine articles
´We Must Grow—In All Areas’, Paper360º May/June 2020
´We Must Grow—In All Areas’, Paper360º May/June 2020