Search
Use the search bar or filters below to find any TAPPI product or publication.
Filters
Content Type
Publications
Level of Knowledge
Committees
Collections
Journal articles
Magazine articles
Prehydrolysis kraft pulping of jute cutting and caddis mixture for rayon production
ABSTRACT: Jute cutting, jute caddis, and cutting-caddis mixtures were prehydrolyzed by varying time and temperature to get about 90% prehydrolyzed yield. At the conditions of 170°C for 60 min of prehydrolysis, the yield for 100% jute cutting was 76.3%, while the same for jute caddis was only 67.9%. But with prehydrolysis at 150°C for 60 min, the yield was 90% for jute cutting, where 49.94% of original pentosan was dissolved and prehydrolysis of jute caddis at 140°C in 60 min yielded 86.4% solid residue. Jute cutting-caddis mixed prehydrolysis was done at 140°C for 30 min and yielded 92% solid residue for 50:50 cutting-caddis mixtures, where pentosan dissolution was only 29%. Prehydrolyzed jute cutting, jute caddis, and cutting-caddis mixtures were subsequently kraft cooked. Pulp yield was only 40.9% for 100% jute cutting prehydrolyzed at 170°C for 60 min, which was 10.9% lower than the prehydrolysis at 140°C. For jute cutting-caddis mixed prehydrolysis at 140°C for 45 min followed by kraft cooking, pulp yield decreased by 3.3% from the 100% cutting to 50% caddis in the mixture, but 75% caddis in the mixture decreased pulp yield by 6.7%. The kappa number 50:50 cutting-caddis mixture was only 11.3. Pulp bleachability improved with increasing jute cutting proportion in the cutting-caddis mixture pulp.
Journal articles
Magazine articles
Sources, collection, and handling of noncondensible gases in modern kraft pulp mills
ABSTRACT: This work describes and discusses sources of noncondensible gases (NCG) in modern kraft pulp mills and modern NCG collection from process units where odor emissions can occur if these gases are released to the surroundings. A mill-wide overview of NCG sources and collection in modern pulp mills is provided. Using modern practices, malodorous gases can be collected to the extent that a pulp mill is essentially odor free. The key to limiting complaint-causing odors is prevention of these emissions during process disturbances, equipment malfunctions, operator errors, and other unforeseen occurrences.
Journal articles
Magazine articles
Research needs for nanocellulose commercialization and applications
INTRODUCTION: This short review deals with some applications and research needs for nanocellulosic (NC) materials; primarily cellulose nanocrystals (CNC), cellulose nanofibers (CNF), and bacterial cellulose (BC). Whereas CNC and BC materials are fairly homogenous, CNF materials represent a wide sector of different materials, often with a high heterogeneity. This is due to different pretreatment methods (mechanical, chemical, enzymatic), woodbased or agricultural-based materials, delignification and bleaching procedures, etc. The purpose of this comprehensive review is not to discuss the various production methods, for which the reader may consult with a selected number of reviews [1-6]; thus, the focus is on practical applications. Practical applications and potential markets were also discussed some years ago by other investigators [7-8]. Upscaling and choice of pretreatment methods, as well as economic considerations and different business models, have also been discussed, along with: œ Toxicity and environmental issues [9-10] œ The complex characterization of cellulose nanomaterials [4] The reader should also be aware of new contenders to the three classic groups of cellulosic nanomaterials, which are already in a commercial phase. These include cellulose filaments [11-12] and materials from mechanical grinding processes [13], and these materials may be nanostructures or not, depending on our classification. Finally, as indicated by the editorial on p. 275, scientists are currently taking a deep dive into the fundamental features of nanocellulosic materials [14-15].
Journal articles
Magazine articles
Effects of preincubation on the gelatinization of cassava and corn starch suspensions containing sodium hydroxide as a main component of corrugating adhesives
ABSTRACT: Effects of the preincubation temperature and the caustic-ratio, the molar ratio of sodium hydroxide to starch glucose residue, on the gelatinization of cassava starch and corn starch suspensions were studied using differential scanning calorimetry in view of utilization for corrugating adhesives. The gelatinization temperature and enthalpy change of cassava starch suspensions after the preincubation at 30°C decreased as the caustic-ratio increased, similar to those of corn starch ones: The gelatinization starting temperature (Ts) decreased considerably more than the peak temperature and the conclusion temperature (Tc). Although Ts lowered and the width of gelatinization temperature expanded, compared with those of corn starch suspensions, the two starch suspensions with the same half gelatinization transition temperature showed similar gelatinization characteristics of almost the same Ts and Tc. During 1 h-preincubations at 30°C•50°C, the starch granules with Ts that were lowered considerably below each preincubation temperature by sodium hydroxide showed limited gelatinization. The gelatinization transition did not rapidly spread over the whole suspension, but progressed stepwise in response to the increase of the causticratio and the rise of the preincubation temperature. In a prolonged preincubation at a constant temperature, Ts gradually rose at higher caustic-ratios in which stepwise gelatinization commenced. Although the starch gelatinization was irreversible and not in a stable equilibrium state for a long time, we concluded that such stepwise gelatinization progress controlled the practical preparation and use of corrugating adhesives.
Journal articles
Editorial: Innovation in Paper Science and Engineering at the University of Wisconsin•Stevens Point, TAPPI Journal October 2026
This is the first in a series of editorial profiles featuring the academic and research portfolios of Forest Products Universities focusing on pulp and paper science and engineering, biorefinery, bioproducts, and other industry-related topics. These profiles include information about faculty, facilities, student success, and future plans. • Arthur J. Ragauskas, Editor-in-Chief, TAPPI Journal
Journal articles
Dynamic modeling, efficiency analysis, and hierarchical control of industrial airborne pulp dryers, TAPPI Journal October 2026
ABSTRACT: Industrial airborne pulp drying is governed by strongly coupled moisture transport, heat transfer, psychrometric behavior, airflow distribution, pressure dynamics, and fan operation. A nonlinear multi-zone dynamic model was formulated to represent these interactions through coupled mass and energy balances, pressure-driven deck-to-deck airflow, centrifugal-fan dynamics, and through-thickness moisture and temperature transport. Overall and thermal efficiencies, specific energy consumption, and specific moisture evaporation ratio (SMER) were incorporated for energetic assessment. A hierarchical direct synthesis methodology (DSM), comprising moisture•temperature and airflow•fan speed cascade loops with chamber-pressure regulation, was evaluated against proportionalintegral- derivative (PID) control and model predictive control (MPC) benchmarks. The MATLAB simulations of a six-zone dryer predicted progressive moisture reduction toward 0.120 kg H2O/kg dry pulp, overall efficiency near 0.60, thermal efficiency near 0.61, and SMER of approximately 0.95-0.96 kg H2O/kWh. The DSM provided the lowest accumulated moisture-tracking error and smooth control action, while PID control gave comparable fast loop regulation. The current MPC implementation exhibited poorer moisture•thermal tracking, indicating the need for further predictive model refinement and systematic tuning. The formulation provides a controloriented basis for subsequent parameter identification and industrial validation.
Journal articles
Analysis of wrinkle formation and propagation during paperboard deep drawing, TAPPI Journal October 2026
ABSTRACT: Paper-based packaging is becoming increasingly important as a sustainable alternative to plastics. Among forming processes, deep drawing is particularly promising due to its high cost-effectiveness, short processing times, and suitability for large-scale production. A major challenge, however, lies in the formation of wrinkles, which impair the visual quality, functional performance, and dimensional stability of the packaging, thereby affecting subsequent processes such as filling, printing, and sealing. This study focuses on analyzing the occurrence and propagation of wrinkles during the deep drawing of paperbased materials to derive fundamental insights and strategies for prevention. The wrinkles arise from tangential compressive stresses in the flange and the material’s limited thickening, leading to local stability failures once a critical stress threshold is exceeded. A combined approach of experimental investigations, numerical simulations, and analytical considerations was used to examine a rotationally symmetrical part. A transparent die enabled spatial observation of wrinkle initiation and growth. First, wrinkles were found to typically initiate in the cross direction (CD), while most wrinkles develop in the machine direction (MD). By comparing analytically and numerically determined stress distributions, the mechanisms of wrinkle formation can be understood both locally and temporally, thereby enabling the prediction of wrinkle occurrence.
Journal articles
Aqueous polymer dispersions from long chain cellulose fatty acid ester for coating of paperboard, TAPPI Journal October 2026
ABSTRACT: Fiber-based substrates are coated with aqueous polymer dispersions to obtain the necessary barrier properties for, e.g., food service, takeaway, and other packaging applications. There is interest to replace non-renewable substances driven by the concerns over the price stability and depletion of fossil resources, environmental and safety issues, and legislative actions. In this study, we demonstrated that stable aqueous polymer dispersions with solids content of at least 35% can be prepared from a long chain cellulose fatty acid ester (cellulose octanoate) using both solvent-based and thermomechanical processes. In the solvent-based process, water and additives were mixed with a polymer dissolved in chloroform followed by solvent removal. In the thermomechanical method, water and stabilizers were added into polymer melt under mixing in a pressurized reactor. Dispersions were tested as coatings on paperboard and assessed for their grease resistance and water and oil barrier. Oil barrier was clearly improved with most of the dispersions. In addition, proper film formation was necessary for achieving improved water barrier. However, the stabilizing system had a clear impact on the dispersion stability and the water barrier performance of these coatings.
Journal articles
Editorial: AI in Higher Education: Implications for scholarly publishing, TAPPI Journal September 2026
Even as we grapple with the positive and negative implications of artificial intelligence (AI), it has become increasingly embedded in our personal lives and work, including higher education. A recent snapshot of AI’s impact in this area is the Digital Education Council’s (DEC’s) AI in Higher Education Global Survey 2026. Founded in early 2024 to study how AI and digital transformation impact higher education, learning, and workforce skills, DEC is made up of member institutions throughout the world in academia and vocational learning. It currently has more than 200 members in over 42 countries.
Journal articles
Nonlinear modeling of batch digester discharge dynamics with rheology-driven hydraulic transport and drainability coupling, TAPPI Journal September 2026
ABSTRACT: Batch digester blowdown constitutes a strongly nonlinear transient transport process governed by the coupled evolution of pulp consistency, slurry density, hydraulic resistance, liquid inventory, and discharge line dynamics. A control-oriented nonlinear formulation is developed by coupling dry fiber and free liquor mass balances with phase volume reconstruction, consistency-dependent hydraulic resistance, channeling and drainability effects, and a power law head flow relationship derived within a lumped hydraulic inertance framework. A fixed-gain PI controller obtained from local linearization is employed as the conventional benchmark, whereas an integral sliding mode controller (SMC) explicitly compensates the nonlinear time-varying hydraulic structure and bounded disturbances. Both strategies are evaluated under identical actuator constraints and sequential perturbations involving opposing head, hydraulic resistance, channeling, drainability, and dilution. Numerical results demonstrate lower rootmean- square error, integral absolute error, and peak flow-tracking error for the SMC, with rapid recovery toward the prescribed sliding boundary layer and improved robustness to variations in the nonlinear flow exponent n. Cumulative electrical energy and batch-specific specific energy consumption remain comparatively similar, indicating that the principal SMC benefit is enhanced hydraulic regulation rather than substantial batch energy reduction. Specific energy consumption is an established metric for energetic assessment of slurry transport. Model-based hydraulic demand, electrical power, and sliding manifold surfaces further characterize the nonlinear operating domain. The resulting framework provides a computational proof-of-concept for modeling and control of transient batch digester discharge systems.