Search
Use the search bar or filters below to find any TAPPI product or publication.
Filters
Content Type
Publications
Level of Knowledge
Committees
Collections
Journal articles
Microstructure simulation of early paper forming using immersed boundary methods, TAPPI JOURNAL November 2011
Microstructure simulation of early paper forming using immersed boundary methods, TAPPI JOURNAL November 2011
Journal articles
Copper-embedded polyvinyl alcohol (PVOH)-based antimicrobial and biodegradable coating for food packaging applications, TAPPI Journal October 2026
ABSTRACT: The food packaging industry increasingly seeks multifunctional, bio-based materials that ensure product safety while supporting strict municipal environmental sustainability goals. This research addresses functional limitations in compostable packaging by developing a polyvinyl alcohol (PVOH)-based antimicrobial and biodegradable coating through precise incorporation of active copper ions. Copper ions were incorporated into a 20% solids-content PVOH matrix at target concentrations of 100, 500, and 1,000 ppm, then applied to paper and polylactic acid (PLA) bioplastic substrates at a target coating weight of 6 g/m². Antimicrobial testing against Escherichia coli and Salmonella spp. using a bacterial overlay agar method demonstrated robust, localized microbial inhibition zones that increased with copper concentration. Biodegradability and industrial compostability were assessed under controlled conditions over 49 days in accordance with ASTM D5338 and ASTM D6400. Uncoated butcher paper controls exhibited 71.90% biodegradation, whereas copper-embedded PVOH-coated paper achieved 83.59%, conclusively demonstrating that integrated metallic ions did not hinder or delay natural macromolecular decomposition. Scanning electron microscopy and elemental analysis verified uniform coating distribution and stable copper dispersion across all treated surfaces. Differential scanning calorimetry revealed minor, predictable modifications to polymer crystallization kinetics without altering macrostructural film integrity. Barrier evaluations (ASTM F1249 and ASTM D3985) confirmed a substantial, highly significant reduction in oxygen transmission rates, whereas the reduction in water vapor transmission rates was not statistically significant due to PVOH’s inherently hydrophilic nature. These findings demonstrate that copper-embedded PVOH coatings provide a highly effective, active antimicrobial defense system while remaining completely compatible with commercial, sustainable industrial composting loops.
Journal articles
Data driven modeling to reduce fossil fuel consumption in a lime kiln integrated with biomass gasifier, TAPPI Journal September 2026
ABSTRACT: Biomass gasification, although already known and applied, is currently being consolidated as a sustainable alternative in the pulp industry, contributing to the reduction of fossil carbon dioxide (CO2) emissions and to the utilization of forest residues. In this context, pulp mills are beginning to adopt biomass gasification within their chemical recovery cycles by integrating the technology with lime kilns. However, further process studies are still needed to support and optimize this application. Thus, the present study aimed to analyze lime mud feed temperature by applying an artificial neural network model to a gasification system integrated with a lime kiln. For this evaluation, 10 periods of system stability throughout 2024 were selected under different operational conditions. Data from 28 potential predictive variables were collected, a total of 348 observations. This dataset was then processed using R software, where data treatment and model dimensionality reduction were performed, resulting in 10 predictive variables between gasifier and kiln. Next, the dataset was randomly divided into training (70% of the observations) and testing data. The established neural network model (using “neuralnet” package) was optimized, resulting in a configuration containing one hidden layer with three neurons. This setup enabled optimal estimation of the flue gas kiln outlet temperature, with mean absolute error (MAE) = 3.0°C and root mean square error (RMSE) = 4.1°C, applying the resilient backpropagation algorithm with backtracking — both below the thermocouple’s measurement error (±5.0°C) for the evaluated average temperature range (668.2°C). When the same dataset was modeled using the resilient backpropagation algorithm without backtracking, even better results were achieved: MAE = 2.5°C and RMSE = 3.7°C. Thus, after evaluating these and other configurations, it was concluded that the best model required 10 predictive variables and the backpropagation algorithm without backtracking to determine flue gas kiln outlet temperature. These results provide a better understanding of how gasifier and kiln variables influence the temperature in the lime kiln, which is essential to improve control and optimize the calcination process, avoiding supplementary fossil fuel consumption.
Journal articles
Biomass gasification for green ammonia production in kraft mills, TAPPI Journal September 2026
ABSTRACT: As the global energy sector transitions toward net-zero emissions, kraft pulp mills present a compelling opportunity to produce green fuels and achieve net-negative emissions by capturing biogenic carbon, helping offset hard-to-abate sectors. This study explores the techno-economics of integrating biomass gasification for green ammonia production within kraft mills, using KraftSIM modeling to evaluate ammonia production, steam balance, emissions, and utility impacts. The proposed design enables energy and water system integration with the existing mill and allows for a gradual scale-up without disrupting the chemistry and operation of the recovery cycle. Across five scenarios representing different biomass gasification rates ranging from 100 to 1000 bone-dry metric tons per day (BDMT/d), the process yields ammonia at approximately 0.51 metric tons per bone-dry metric ton (t/ BDMT), while generating significant low- and medium-pressure steam and hot water that offset mill utility demands. The incineration of pressure swing adsorption tail gas and ammonia plant purge gas in the power boiler reduces biomass combustion and enhances power boiler efficiency. Economic analysis suggests a net revenue potential of approximately CA$380/BDMT, which could increase with the implementation of biogenic carbon pricing. Overall profitability is strongly influenced by biomass procurement costs, electricity prices, and prevailing green fuel and chemical market premium. This work outlines a practical, near-term decarbonization pathway for kraft mills by coupling green fuel production with potential opportunities for carbon removal.
Journal articles
Magazine articles
Can carbon capture be a new revenue opportunity for the pulp and paper sector?, TAPPI Journal August 2021
ABSTRACT: Transition towards carbon neutrality will require application of negative carbon emission technologies (NETs). This creates a new opportunity for the industry in the near future. The pulp and paper industry already utilizes vast amounts of biomass and produces large amounts of biogenic carbon dioxide. The industry is well poised for the use of bioenergy with carbon capture and storage (BECCS), which is considered as one of the key NETs. If the captured carbon dioxide can be used to manufacture green fuels to replace fossil ones, then this will generate a huge additional market where pulp and paper mills are on the front line. The objective of this study is to evaluate future trends and policies affecting the pulp and paper industry and to describe how a carbon neutral or carbon negative pulp and paper production process can be viable. Such policies include, as examples, price of carbon dioxide allowances or support for green fuel production and BECCS implementation. It is known that profitability differs depending on mill type, performance, energy efficiency, or carbon dioxide intensity. The results give fresh understanding on the potential for investing in negative emission technologies. Carbon capture or green fuel production can be economical with an emission trade system, depending on electricity price, green fuel price, negative emission credit, and a mill’s emission profile. However, feasibility does not seem to evidently correlate with the performance, technical age, or the measured efficiency of the mill.
Journal articles
Pulping and Papermaking Properties of Managed Second-Growth
Pulping and Papermaking Properties of Managed Second-Growth Softwoods, 1995 Pulping Conference Proceedings
Journal articles
Tailoring Fiber Properties to Paper Manufacture: Recent Deve
Tailoring Fiber Properties to Paper Manufacture: Recent Developments, 1995 Pulping Conference Proceedings
Journal articles
Modeling coating structure development using a Monte Carlo deposition method Part 1: Modeling methodology, Solutions! & TAPPI JOURNAL, April 2003, Vol. 2(4) (431KB)
Modeling coating structure development using a Monte Carlo deposition method Part 1: Modeling methodology, Solutions! & TAPPI JOURNAL, April 2003, Vol. 2(4) (431KB)
Journal articles
Sizing variations of dispersed rosin sizes with fortification, hardness, pH, and temperature, TAPPI JOURNAL, April 2003, Vol. 2(4) (93KB)
Sizing variations of dispersed rosin sizes with fortification, hardness, pH, and temperature, Solutions! & TAPPI JOURNAL, April 2003, Vol. 2(4) (93KB)
Journal articles
Forming fabric weave-scale variations in paper filler content, TAPPI JOURNAL November 2013
Forming fabric weave-scale variations in paper filler content, TAPPI JOURNAL November 2013