Search
Use the search bar or filters below to find any TAPPI product or publication.
Filters
Content Type
Publications
Level of Knowledge
Committees
Collections
Journal articles
Extended usage of xylanase enzyme to enhance the bleaching of softwood kraft pulp, TAPPI JOURNAL, January 2006
Extended usage of xylanase enzyme to enhance the bleaching of softwood kraft pulp, TAPPI JOURNAL, January 2006, Vol. 5(1) (164 KB)
Journal articles
Comparative annual cost efficiency between thermal and chemical oxidation of TRS in kraft mills, TAPPI JOURNAL, July 2005, Vol. 4(7) (200 KB)
Comparative annual cost efficiency between thermal and chemical oxidation of TRS in kraft mills, TAPPI JOURNAL, July 2005, Vol. 4(7) (200 KB)
Journal articles
Conversion of paper-grade pulp from rice straw into dissolving pulp, TAPPI Journal June 2025
ABSTRACT: About 1,165 million metric tons of rice straw is generated every year worldwide, which can be a good source for the circular bioeconomy. In this research paper, the paper-grade pulp from rice straw was converted to dissolving-grade pulp by fractionation in a biorefinery initiative. Rice straw was cooked at an optimum condition of 8% potassium hydroxide (KOH) charge for 120 min at 150°C and produced a pulp yield of 47.2% with a kappa number of 18.5. Subsequently, D0(EP)D1 bleaching was carried out for the produced pulp, and the brightness of the pulp reached to 82.4%. From the black liquor, 16.5% of the lignin and 11.9% of the hemicellulose were isolated for producing biobased products and chemicals, and then the spent liquor was used for soil amendment. The bleached pulp was fractionated in a Bauer McNett fiber classifier. The pulp fibers retained on 16-, 30-, and 50-mesh screens were used as a longer fiber fraction pulp, and pulp fibers retained on 100- and 200-mesh screens were used as a shorter fiber pulp. The longer and shorter fiber fraction pulps were analyzed for cellulose, R10, pentosan, and viscosity. The long fiber fraction pulps were characterized by higher cellulose (88.2% vs. 83.1%) and lower pentosan (11.3% vs. 13.0%) content than the shorter fiber fraction pulps. The longer fiber fraction was further treated with cold KOH to remove residual hemicellulose. The KOH extraction reduced pentosan content in pulp to 6.3% and increased á-cellulose content to 91.3%. The short fiber fraction was converted to monomeric sugars using cellulase enzymes with varying reaction time, temperature, and consistency. The efficiency of cellulase activity was assessed through glucose yield and residual dry weight. A temperature of 45°C, 5.0 pH, 5% consistency, and 6 filter paper units/gram (FPU/g) o.d. pulp resulted in maximum sugar conversion of 85.7%.
Journal articles
Magazine articles
Numerical analysis of the impact of rotor and screen hole plate design on the performance of a vertical pulper, TAPPI Journal April 2025
ABSTRACT: The dissolving of mechanical pulp is one of the most important process steps in stock preparation, since pulping occurs at the very beginning of the papermaking process. Efficient mixing of the pulp in a short amount of time is essential to achieve high furnish volume flow rates. The design of the rotor, as well as the pulper vat and inserts, significantly affects the overall performance of the pulper, such as mixing efficiency and power demand. Using advanced numerical methods such as computational fluid dynamics (CFD) can accelerate the development process. The CFD simulations allow for detailed analysis of flow phenomena, making it possible to study a real-size machine numerically. This approach is particularly advantageous because it can reduce the need for timeconsuming and costly experiments associated with scaling up test rigs. In this study, we compared two different rotor designs utilized in a vertical pulper and evaluated the numerical results with experimental data. Rotor A is designed for low turbulence and low power demand, while rotor B is designed for high turbulence with high power demand. The CFD results showed good agreement with the experimental measurements. We investigated how the rotor design influences the free fluid surface and the mixing efficiency. Our study also highlights the differences in results depending on whether water or furnish is simulated, which exhibit Newtonian or, respectively, non-Newtonian fluid behavior. Additionally, a detailed numerical investigation of various screen hole plate designs revealed that the newly developed hole design significantly reduces pressure loss compared to a standard drilled hole. This outcome was consistent for both types of fluids investigated: water and furnish.
Journal articles
Magazine articles
Comparing a linear transfer function-noise model and a neural network to model boiler bank fouling in a kraft recovery boiler, TAPPI Journal, July 2024
ABSTRACT: Boiler bank fouling reduces heat transfer efficiency in kraft recovery boilers. Here, we model the relationships between boiler parameters and boiler bank pressure drop, an indicator of fouling, based on recovery boiler operating data. We compared two models: an autoregressive integrated exogenous (ARIX) model and a feedforward neural network. The ARIX model better simulates boiler bank pressure drop compared to the neural network (R2 of 0.64 vs. 0.58). Based on the ARIX model, we identified six boiler parameters that significantly influence boiler bank fouling and their relative contributions. Finally, we demonstrate how the models can simulate boiler bank pressure drop given artificial perturbations in boiler parameters.
Journal articles
Preparation and characterization of cellulose nanofibers from bleached pulp using a mechanical treatment method, TAPPI JOURNAL May 2014
Preparation and characterization of cellulose nanofibers from bleached pulp using a mechanical treatment method, TAPPI JOURNAL May 2014
Journal articles
Influence of kraft pulping on the kinetics of oxygen delignification, TAPPI JOURNAL, February 2000, Vol. 83(2)
Influence of kraft pulping on the kinetics of oxygen delignification, TAPPI JOURNAL, February 2000, Vol. 83(2)
Journal articles
Direct causticization of kraft black liquor solids with tio2 in a fluidized bed, TAPPI JOURNAL, December 2000, Vol. 83(12)
Direct causticization of kraft black liquor solids with tio2 in a fluidized bed, TAPPI JOURNAL, December 2000, Vol. 83(12)
Journal articles
Deinking of newspaper assisted by steam explosion, TAPPI JOURNAL, December 2000, Vol. 83(12)
Deinking of newspaper assisted by steam explosion, TAPPI JOURNAL, December 2000, Vol. 83(12)
Journal articles
Wood quality ranking of plantation trees, TAPPI JOURNAL, December 2000, Vol. 83(12)
Wood quality ranking of plantation trees, TAPPI JOURNAL, December 2000, Vol. 83(12)