Search
Use the search bar or filters below to find any TAPPI product or publication.
Filters
Content Type
Publications
Level of Knowledge
Committees
Event Type
Collections
Conference papers
How A Major Pulp & Paper Manufacturer Reduced MRO Inventory Using RCM Principles, 20PEERS Conference
How A Major Pulp & Paper Manufacturer Reduced MRO Inventory Using RCM Principles, 20PEERS Conference
Journal articles
Conversion of paper-grade pulp from rice straw into dissolving pulp, TAPPI Journal June 2025
ABSTRACT: About 1,165 million metric tons of rice straw is generated every year worldwide, which can be a good source for the circular bioeconomy. In this research paper, the paper-grade pulp from rice straw was converted to dissolving-grade pulp by fractionation in a biorefinery initiative. Rice straw was cooked at an optimum condition of 8% potassium hydroxide (KOH) charge for 120 min at 150°C and produced a pulp yield of 47.2% with a kappa number of 18.5. Subsequently, D0(EP)D1 bleaching was carried out for the produced pulp, and the brightness of the pulp reached to 82.4%. From the black liquor, 16.5% of the lignin and 11.9% of the hemicellulose were isolated for producing biobased products and chemicals, and then the spent liquor was used for soil amendment. The bleached pulp was fractionated in a Bauer McNett fiber classifier. The pulp fibers retained on 16-, 30-, and 50-mesh screens were used as a longer fiber fraction pulp, and pulp fibers retained on 100- and 200-mesh screens were used as a shorter fiber pulp. The longer and shorter fiber fraction pulps were analyzed for cellulose, R10, pentosan, and viscosity. The long fiber fraction pulps were characterized by higher cellulose (88.2% vs. 83.1%) and lower pentosan (11.3% vs. 13.0%) content than the shorter fiber fraction pulps. The longer fiber fraction was further treated with cold KOH to remove residual hemicellulose. The KOH extraction reduced pentosan content in pulp to 6.3% and increased á-cellulose content to 91.3%. The short fiber fraction was converted to monomeric sugars using cellulase enzymes with varying reaction time, temperature, and consistency. The efficiency of cellulase activity was assessed through glucose yield and residual dry weight. A temperature of 45°C, 5.0 pH, 5% consistency, and 6 filter paper units/gram (FPU/g) o.d. pulp resulted in maximum sugar conversion of 85.7%.
Journal articles
Magazine articles
Rethinking the paper cup — beginning with extrusion process optimization for compostability and recyclability, TAPPI Journal June 2021
ABSTRACT: More than 50 billion disposable paper cups used for cold and hot beverages are sold within the United States each year. Most of the cups are coated with a thin layer of plastic — low density polyethylene (LDPE) — to prevent leaking and staining. While the paper in these cups is both recyclable and compostable, the LDPE coat-ing is neither. In recycling a paper cup, the paper is separated from the plastic lining. The paper is sent to be recycled and the plastic lining is typically sent to landfill. In an industrial composting environment, the paper and lining can be composted together if the lining is made from compostable materials. Coating paper cups with a compostable performance material uniquely allows for used cups to be processed by either recycling or composting, thus creating multiple pathways for these products to flow through a circular economy.A segment of the paper converting industry frequently uses an extrusion grade of polylactic acid (PLA) for zero-waste venues and for municipalities with ordinances for local composting and food service items. The results among these early adopters reveal process inefficiencies that elevate manufacturing costs while increasing scrap and generally lowering output when using PLA for extrusion coating. NatureWorks and Sung An Machinery (SAM) North America researched the extrusion coating process utilizing the incumbent polymer (LDPE) and PLA. The trademarked Ingeo 1102 is a new, compostable, and bio-based PLA grade that is specifically designed for the extrusion coating process. The research team identified the optimum process parameters for new, dedicated PLA extrusion coating lines. The team also identified changes to existing LDPE extrusion lines that processors can make today to improve output.The key finding is that LDPE and PLA are significantly different polymers and that processing them on the same equipment without modification of systems and/or setpoints can be the root cause of inefficiencies. These polymers each have unique processing requirements with inverse responses. Fine tuning existing systems may improve over-all output for the biopolymer without capital investment, and this study showed an increase in line speed of 130% by making these adjustments. However, the researchers found that highest productivity can be achieved by specifying new systems for PLA. A line speed increase to more than 180% and a reduction in coat weight to 8.6 µm (10.6 g/m2 or 6.5 lb/3000 ft2) was achieved in this study. These results show that Ingeo 1102 could be used as a paper coating beyond cups.
Conference papers
Development and Application of an Object-Oriented Simulation Tool for Kraft Recovery Processes, 2018 PEERS
Development and Application of an Object-Oriented Simulation Tool for Kraft Recovery Processes, 2018 PEERS
Developing Numeric Nutrient Criteria: Impacts on the Pulp and Paper Industry, 2008 Engineering, Pulping and Environmental Conference
Developing Numeric Nutrient Criteria: Impacts on the Pulp and Paper Industry, 2008 Engineering, Pulping and Environmental Conference
Measurement of Microstickies, 2008 Engineering, Pulping and Environmental Conference
Measurement of Microstickies, 2008 Engineering, Pulping and Environmental Conference
Effects of Extractives from Mountain Pine Beetle-Attacked Lodgepole Pine on Kraft Mills, 2008 Engineering, Pulping and Environmental Conference
Effects of Extractives from Mountain Pine Beetle-Attacked Lodgepole Pine on Kraft Mills, 2008 Engineering, Pulping and Environmental Conference
Effects on Kraft and Mechanical Pulping and Pulp Quality when Utilizing Mountain Pine Beetle-Killed (MPB) Wood: An Overview, 2008 Engineering, Pulping and Environmental Conference
Effects on Kraft and Mechanical Pulping and Pulp Quality when Utilizing Mountain Pine Beetle-Killed (MPB) Wood: An Overview, 2008 Engineering, Pulping and Environmental Conference
Energy Efficiency and Cost Reduction through the implementation of low pressure sootblowing system, 2008 Engineering, Pulping and Environmental Conference
Energy Efficiency and Cost Reduction through the implementation of low pressure sootblowing system, 2008 Engineering, Pulping and Environmental Conference
Experimental Study of Dioxin Formation and Emissions from Power Boilers Burning Salt-Laden Wood Waste, 2008 Engineering, Pulping and Environmental Conference
Experimental Study of Dioxin Formation and Emissions from Power Boilers Burning Salt-Laden Wood Waste, 2008 Engineering, Pulping and Environmental Conference